{"title":"Feltona Cretezenz Package Deal","description":"\u003cp\u003eHere you’ll find the package deals from the Feltona Cretezenz system. \u003c\/p\u003e","products":[{"product_id":"feltona-epoxy-primer-dt-13-4-kg-a-b","title":"Feltona Epoxy Primer DT 13.4 kg (A+B)","description":"\u003cp\u003eFeltona Epoxy Primer DT is a primer for floors where you are unsure about the moisture content of the substrate, for example a tiled floor. We recommend it for bathroom floors and self-levelling compound.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eEpoxy Primer DT is a two-component, solvent-free primer. Epoxy Primer DT is intended for use on mineral substrates such as concrete, masonry, render and tiles. Apply to untreated substrates before further treatment with epoxy, polyurethane or microcement. Epoxy Primer DT is particularly suitable for concrete with surface moisture. It must be broadcast with sand.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cu\u003e\u003cstrong\u003eTechnical data: \u003c\/strong\u003e\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Clear, yellowish\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication method:\u003c\/strong\u003e Squeegee, rubber squeegee or notched trowel. A roller may also be used\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCleaning agent:\u003c\/strong\u003e Xylene or isopropanol. Cured product can only be removed mechanically.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThinning:\u003c\/strong\u003e The product must not be thinned.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended coverage:\u003c\/strong\u003e Approx. 0.2–0.4 kg\/m2, depending on the substrate\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePot life:\u003c\/strong\u003e 50 min. Should be used immediately after parts A and B have been mixed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDust-dry:\u003c\/strong\u003e 2 hours (20°C, 50% R.H.)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum overcoating time:\u003c\/strong\u003e 48 hours (20°C, 50% R.H.)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication temperature:\u003c\/strong\u003e From +12°C to +30°C for both the substrate and air, and at least 3°C above the prevailing dew point.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCuring time:\u003c\/strong\u003e 5–7 days\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShelf life:\u003c\/strong\u003e 2 years in unopened packaging at normal storage temperature\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cu\u003e\u003cstrong\u003eInstructions for use\u003c\/strong\u003e\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cu\u003ePreparation\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003eThe substrate must be sound, clean, dry and free of grease. Maximum residual moisture in the substrate: 5% (95% R.H.). Minimum concrete grade: C25. Prepare concrete by grinding, milling, shot blasting or sandblasting. Vacuum the surface thoroughly afterwards.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eMixing and application\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003ePour part B into part A and mix thoroughly for 3–4 min. using a slow-speed drill with a mixing paddle. The mixture must be used immediately. Apply evenly and generously with a squeegee, rubber squeegee or notched trowel. The minimum application temperature is +12°C; this applies to both the substrate and the air. The product temperature must be above +15°C during use. After application, all pores must be filled and the surface should appear sealed, with no dry patches. This is important to prevent air bubbles in the topcoat. The topcoat must be applied within 48 hours. If this time interval is exceeded, the surface must be lightly sanded to ensure adequate adhesion. Sand may be broadcast onto the primer to improve adhesion between the products. \u003c\/p\u003e","brand":"Feltona","offers":[{"title":"Default Title","offer_id":46099667845258,"sku":"10116","price":7125.0,"currency_code":"NOK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/4739\/0602\/files\/feltona-epoxy-primer-dt-13-4-kg.png?v=1794181945"},{"product_id":"mirka-deros-ii-5650-eu-o-125-150mm-orbit-5-0mm-m-koffert","title":"Mirka® DEROS II 680 EU Ø 150 mm, 8.0 mm orbit (Box)","description":"\u003cdiv class=\"SCXW91697984 BCX4\"\u003e\n\n\u003cdiv class=\"OutlineElement Ltr SCXW91697984 BCX4\"\u003e\n\n\u003cp class=\"p1\"\u003e \u003c\/p\u003e\n\n\u003ch1\u003e\u003cb\u003eMirka DEROS II 680 – Electric 150 mm Random Orbital Sander for Professional, Dust-Free Sanding\u003c\/b\u003e\u003c\/h1\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp class=\"p2\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\n\u003cp class=\"p3\"\u003eThe Mirka® DEROS II 680 is an advanced 150 mm electric random orbital sander designed for fast, efficient and \u003cspan class=\"s2\"\u003e\u003cb\u003edust-free sanding\u003c\/b\u003e\u003c\/span\u003e on all types of surfaces. With an \u003cspan class=\"s2\"\u003e\u003cb\u003e8.0 mm orbit\u003c\/b\u003e\u003c\/span\u003e, this model delivers high material removal while maintaining a smooth, controlled random orbit – ideal for both professional tradespeople and quality-conscious enthusiasts.\u003c\/p\u003e\n\n\u003cp class=\"p2\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\n\u003cp class=\"p1\"\u003e \u003c\/p\u003e\n\n\u003ch2\u003e\u003cb\u003eCompact, powerful and ergonomic sander\u003c\/b\u003e\u003c\/h2\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp class=\"p2\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\n\u003cp class=\"p3\"\u003eThe Mirka DEROS II 680 builds on the success of the first-generation DEROS, combining a compact design with improved ergonomics and ease of use. Its low weight and balanced construction provide exceptional working comfort and reduce strain during extended use.\u003c\/p\u003e\n\n\u003cp class=\"p2\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\n\u003cp class=\"p3\"\u003eThe sander is known for its:\u003c\/p\u003e\n\n\u003cp class=\"p1\"\u003e \u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp class=\"p1\"\u003eLow profile\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp class=\"p1\"\u003eOptimal balance\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp class=\"p1\"\u003eExcellent ergonomics\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp class=\"p1\"\u003eHigh operator comfort\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp class=\"p2\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\n\u003cp class=\"p3\"\u003eThis makes it particularly suitable for professional use in car care, woodworking, surface finishing, industry and construction.\u003c\/p\u003e\n\n\u003cp class=\"p2\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\n\u003cp class=\"p1\"\u003e \u003c\/p\u003e\n\n\u003ch2\u003e\u003cb\u003eLow vibration and quiet operation\u003c\/b\u003e\u003c\/h2\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp class=\"p2\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\n\u003cp class=\"p3\"\u003eThanks to the machine’s \u003cspan class=\"s2\"\u003e\u003cb\u003elow vibration levels\u003c\/b\u003e\u003c\/span\u003e and \u003cspan class=\"s2\"\u003e\u003cb\u003equiet motor\u003c\/b\u003e\u003c\/span\u003e, the Mirka DEROS II can be used for extended periods without fatigue. The new design offers improved control with:\u003c\/p\u003e\n\n\u003cp class=\"p1\"\u003e \u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp class=\"p1\"\u003eAn intuitive control lever for adjusting sanding speed\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp class=\"p1\"\u003eClear LED speed indicators\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp class=\"p1\"\u003eA dedicated on\/off switch for safer operation\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp class=\"p2\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\n\u003cp class=\"p3\"\u003eThis gives users complete precision and control throughout the entire work process.\u003c\/p\u003e\n\n\u003cp class=\"p2\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\n\u003cp class=\"p1\"\u003e \u003c\/p\u003e\n\n\u003ch2\u003e\u003cb\u003ePowerful brushless motor with a long service life\u003c\/b\u003e\u003c\/h2\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp class=\"p2\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\n\u003cp class=\"p3\"\u003eThe high-efficiency brushless motor maintains a constant speed, even under heavy load, making the sander perfect for demanding tasks and heavier applications. The machine is part of Mirka’s renowned \u003cspan class=\"s2\"\u003e\u003cb\u003edust-free sanding\u003c\/b\u003e\u003c\/span\u003e solution, creating a cleaner working environment and delivering better results.\u003c\/p\u003e\n\n\u003cp class=\"p2\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\n\u003cp class=\"p1\"\u003e \u003c\/p\u003e\n\n\u003ch2\u003e\u003cb\u003eBluetooth and myMirka integration\u003c\/b\u003e\u003c\/h2\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp class=\"p2\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\n\u003cp class=\"p3\"\u003eThe Mirka DEROS II 680 comes with built-in \u003cspan class=\"s2\"\u003e\u003cb\u003eBluetooth connectivity\u003c\/b\u003e\u003c\/span\u003e, allowing you to easily connect the machine to the myMirka app for:\u003c\/p\u003e\n\n\u003cp class=\"p1\"\u003e \u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp class=\"p1\"\u003eVibration monitoring\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp class=\"p1\"\u003eMachine data and usage history\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp class=\"p1\"\u003eOptimising working conditions\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp class=\"p2\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\n\u003cp class=\"p3\"\u003eThis makes the machine a modern, smart tool for professional users.\u003c\/p\u003e\n\n\u003cp class=\"p3\"\u003e https:\/\/cdn.brandfolder.io\/FSMPOV8D\/at\/pxnvk6th78gf9c5rvmgwxnmf\/Exploded_view_Mirka_DEROS_II_125_150_175mm_220_240V.pdf\u003c\/p\u003e\n\n\u003cp class=\"p3\"\u003e \u003c\/p\u003e\n\n\u003cp class=\"p3\"\u003ehttps:\/\/cdn.brandfolder.io\/FSMPOV8D\/at\/v9mkf5qbn88xg5c558fbf6j\/DEROS_II_230V_11-2023_web.pdf\u003c\/p\u003e\n\n\u003cp class=\"p3\"\u003e \u003c\/p\u003e\n\n\u003cp class=\"p3\"\u003e \u003c\/p\u003e\n\n\u003ch4 class=\"mirka-h4 mb-3\"\u003eTechnical specifications\u003c\/h4\u003e\n\n\u003ctable\u003e\n\n\u003cthead\u003e\n\n\u003ctr\u003e\u003c\/tr\u003e\n\n\n\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eConnectivity\u003c\/td\u003e\n\n\u003ctd\u003e\u003cstrong\u003eBluetooth\u003c\/strong\u003e\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eDust extraction system\u003c\/td\u003e\n\n\u003ctd\u003e\u003cstrong\u003eCentral vacuum\u003c\/strong\u003e\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eIP rating\u003c\/td\u003e\n\n\u003ctd\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMax. speed\u003c\/td\u003e\n\n\u003ctd\u003e\u003cstrong\u003e10000 rpm\u003c\/strong\u003e\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMin. speed\u003c\/td\u003e\n\n\u003ctd\u003e\u003cstrong\u003e4000 rpm\u003c\/strong\u003e\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eNoise level\u003c\/td\u003e\n\n\u003ctd\u003e\u003cstrong\u003e71.0 dB\u003c\/strong\u003e\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eOrbit\u003c\/td\u003e\n\n\u003ctd\u003e\u003cstrong\u003e8 mm\u003c\/strong\u003e\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eOrbital type\u003c\/td\u003e\n\n\u003ctd\u003e\u003cstrong\u003eRandom orbital\u003c\/strong\u003e\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eBacking pad diameter\u003c\/td\u003e\n\n\u003ctd\u003e\u003cstrong\u003e150 mm\u003c\/strong\u003e\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eBacking pad included\u003c\/td\u003e\n\n\u003ctd\u003e\u003cstrong\u003e8292605011\u003c\/strong\u003e\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003ePlug type\u003c\/td\u003e\n\n\u003ctd\u003e\u003cstrong\u003eEU\u003c\/strong\u003e\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003ePower input\u003c\/td\u003e\n\n\u003ctd\u003e\u003cstrong\u003e400 W\u003c\/strong\u003e\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eVibration level\u003c\/td\u003e\n\n\u003ctd\u003e\u003cstrong\u003e3.5 m\/s²\u003c\/strong\u003e\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSupply voltage\u003c\/td\u003e\n\n\u003ctd\u003e\u003cstrong\u003e220-240 VAC\u003c\/strong\u003e\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eWeight\u003c\/td\u003e\n\n\u003ctd\u003e\n\n\u003cp\u003e\u003cstrong\u003e1.1 kg\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\n\n\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\n\u003c\/div\u003e\n\n\n\u003c\/div\u003e","brand":"Mirka","offers":[{"title":"Default Title","offer_id":46099712180362,"sku":"MID6804044","price":6030.0,"currency_code":"NOK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/4739\/0602\/files\/Skjermbilde_2025-12-20_kl._19.59.28.png?v=1766257309"},{"product_id":"feltona-epoxy-primer-dt-6-7-kg-a-b","title":"Feltona Epoxy Primer DT 6.7 kg (A+B)","description":"\u003cp\u003eFeltona Epoxy Primer DT is a primer for floors where you are unsure about the moisture content of the substrate, for example a tiled floor. We recommend it for bathroom floors and self-levelling compounds.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eEpoxy Primer DT is a two-component, solvent-free primer. Epoxy Primer DT is intended for use on mineral substrates such as concrete, masonry, plaster and tiles. Apply to untreated substrates before further treatment with epoxy, polyurethane or microcement. Epoxy Primer DT is particularly suitable for concrete with moisture on the surface. Must be sand broadcast.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cu\u003e\u003cstrong\u003eApplication data: \u003c\/strong\u003e\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Clear, yellowish\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication method:\u003c\/strong\u003e Squeegee, rubber squeegee or notched trowel. A roller can also be used\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCleaning agent:\u003c\/strong\u003e Xylene or Isopropanol. Cured product can only be removed mechanically.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThinning:\u003c\/strong\u003e The product must not be thinned.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended consumption:\u003c\/strong\u003e Approx. 0.2–0.4 kg\/m2, depending on the substrate\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePot life:\u003c\/strong\u003e 50 min. Should be used immediately after parts A and B have been mixed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDust dry:\u003c\/strong\u003e 2 hours (20°C, 505 R.H)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum overcoating time:\u003c\/strong\u003e 48 hours (20°C, 505 R.H)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication temperature:\u003c\/strong\u003e From +12°C to +30°C for both substrate and air, and at least 3 C above the current dew point.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCuring time:\u003c\/strong\u003e 5–7 days\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShelf life:\u003c\/strong\u003e 2 years in unopened packaging at normal storage temperature\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cu\u003e\u003cstrong\u003eInstructions for use\u003c\/strong\u003e\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cu\u003ePre-treatment\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003eThe substrate must be firm, clean, dry and free of grease. Maximum residual moisture in the substrate 5% (95 RH). Concrete grade min. C 25. Concrete must be pre-treated by grinding, milling, shot blasting or sandblasting. Vacuum the surface thoroughly at the end.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eMixing and application\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003ePour part B into part A and mix thoroughly for 3–4 min. using a slow-speed drill with a mixer attachment. The mixture must be used immediately. Apply evenly and generously with a squeegee, rubber squeegee or notched trowel. The minimum application temperature is +12°C; this applies to both the substrate and air temperature. The product temperature must be above +15°C when used. After application, all pores must be filled and the surface must appear sealed, with no dry patches. This is important to prevent air bubbles in the topcoat. The topcoat must be applied within 48 hours. If this time interval is exceeded, the surface must be lightly sanded to ensure adequate adhesion. The primer can be sand broadcast to increase adhesion between the products. \u003c\/p\u003e","brand":"Feltona","offers":[{"title":"Default Title","offer_id":46099716997258,"sku":"10115","price":3625.0,"currency_code":"NOK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/4739\/0602\/files\/feltona-epoxy-primer-dt-6-7-kg-etikett.png?v=1794215899"},{"product_id":"feltona-epoxy-primer-dt-0-8-kg-a-b","title":"Feltona Epoxy Primer DT 0.8 kg (A+B)","description":"\u003cp\u003eFeltona Epoxy Primer DT is a primer for floors where the moisture content of the substrate is uncertain, such as a tiled floor. We recommend it for bathroom floors and self-levelling compound.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eEpoxy Primer DT is a two-component, solvent-free primer. Epoxy Primer DT is intended for use on mineral substrates such as concrete, masonry, render and tiles. Apply to untreated substrates before further treatment with epoxy, polyurethane or microcement. Epoxy Primer DT is particularly suitable for concrete with surface moisture. Must be sand-broadcast.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cu\u003e\u003cstrong\u003eApplication data: \u003c\/strong\u003e\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Clear, yellowish\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication method:\u003c\/strong\u003e Squeegee, rubber squeegee or notched trowel. A roller can also be used\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCleaning agent:\u003c\/strong\u003e Xylene or isopropanol. Cured product can only be removed mechanically.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThinning:\u003c\/strong\u003e The product must not be thinned.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended coverage:\u003c\/strong\u003e Approx. 0.2–0.4 kg\/m2, depending on the substrate\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePot life:\u003c\/strong\u003e 50 min. Should be used immediately after parts A and B have been mixed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDust-dry:\u003c\/strong\u003e 2 hours (20°C, 50% R.H.)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum recoat time:\u003c\/strong\u003e 48 hours (20°C, 50% R.H.)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication temperature:\u003c\/strong\u003e From +12°C to +30°C for the substrate and air, and at least 3°C above the current dew point.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCuring time:\u003c\/strong\u003e 5–7 days\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShelf life:\u003c\/strong\u003e 2 years in unopened packaging when stored at normal storage temperatures\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cu\u003e\u003cstrong\u003eInstructions for use\u003c\/strong\u003e\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cu\u003ePre-treatment\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003eThe substrate must be sound, clean, dry and free of grease. Maximum residual moisture in the substrate: 5% (95% R.H.). Concrete grade: min. C25. Concrete must be pre-treated by grinding, milling, shot blasting or sandblasting. Vacuum the surface thoroughly at the end.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eMixing and application\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003ePour part B into part A and mix thoroughly for 3–4 min. using a slow-speed drill with a mixer attachment. The mixture must be used immediately. Apply evenly and generously using a squeegee, rubber squeegee or notched trowel. The minimum application temperature is +12°C; this applies to both the substrate and the air. The product temperature must be above +15°C during use. After application, all pores must be filled and the surface must appear sealed, with no dry patches. This is important to prevent air bubbles in the topcoat. The topcoat must be applied within 48 hours. If this time is exceeded, the surface must be lightly sanded to ensure adequate adhesion. The primer can be sand-broadcast to improve adhesion between the products. \u003c\/p\u003e","brand":"Feltona","offers":[{"title":"Default Title","offer_id":46099717259402,"sku":"10114","price":849.0,"currency_code":"NOK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/4739\/0602\/files\/feltona-epoxy-primer-dt-0-8-kg-etikett-v2.png?v=1794215911"},{"product_id":"marmorino-gulvbrett-flexible-25-cm","title":"Marmorino Floor Trowel, Flexible, 25 cm","description":"\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eMarmorino Floor Trowel, Flexible 25 cm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eWide putty knife for all types of plaster\u003c\/span\u003e\u003c\/p\u003e","brand":"Zenzorama","offers":[{"title":"Default Title","offer_id":46099728466058,"sku":"67305","price":760.0,"currency_code":"NOK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/4739\/0602\/files\/67305.png?v=1748945639"},{"product_id":"quick-rep-sparkel-10kg","title":"Feltona Quick-repair filler 10 kg","description":"\u003cp\u003eFeltona Quick Rep. Fast-setting filler for uneven surfaces. Can be used before applying microcement to joints or other uneven areas on concrete or stable substrates. Dries quickly. \u003c\/p\u003e\n\u003cp\u003eRead the data sheet before starting.\u003c\/p\u003e","brand":"Zenzorama","offers":[{"title":"Default Title","offer_id":46099762053258,"sku":"350117","price":890.0,"currency_code":"NOK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/4739\/0602\/files\/feltona-quick-rep-10-kg.png?v=1794181775"},{"product_id":"elite-dual-exotic-280x80x0-6-marmorino-brett-elite-dual-exotic-280x80x0-6","title":"Elite Dual Exotic 280x80x0.6 Marmorino Trowel, Elite Dual Exotic 280x80x0.6","description":"\u003cp data-start=\"52\" data-end=\"202\"\u003e\u003cstrong data-start=\"52\" data-end=\"77\"\u003eELITE PRO DUAL EXOTIC\u003c\/strong\u003e\u003cbr data-start=\"77\" data-end=\"80\"\u003eInspired by suggestions from master Gian Carlo Sagasti, this unique trowel is designed for precision and an exclusive finish.\u003c\/p\u003e\n\u003cp data-start=\"204\" data-end=\"431\"\u003eEquipped with an ergonomic rubber handle and an aluminum alloy fork plated with 24-karat gold. Trapezoidal, straight-ground stainless steel blade with a mirror-polished finish, 0.6 mm thick—ideal for high-precision decorative applications.\u003c\/p\u003e","brand":"Zenzorama","offers":[{"title":"Default Title","offer_id":46099841777802,"sku":"26091","price":770.0,"currency_code":"NOK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/4739\/0602\/files\/26091.png?v=1750235354"},{"product_id":"marmorino-spade-venice-150mm","title":"Marmorino Spade, Venice, 150 mm","description":"\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eSPATOLA VENICE\u003c\/b\u003e\u003cbr\u003eExtra-flexible stainless steel trowel with high wear resistance, variable thickness and sharp edges, mirror-polished. New ergonomic rubber handle.\u003c\/p\u003e","brand":"Zenzorama","offers":[{"title":"Default Title","offer_id":46099911082122,"sku":"65150","price":245.0,"currency_code":"NOK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/4739\/0602\/files\/65060_c9b00dac-5281-403c-905b-7c6ade57d479.png?v=1748945498"},{"product_id":"feltona-cretezenz-mikrosement-base-12-kg","title":"Feltona Cretezenz microcement – Base 12 kg","description":"\u003cp\u003e\u003cstrong\u003eCretezenz Base – the foundation beneath Medium and Fine\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCretezenz Base is the first layer in the Feltona Cretezenz system. Apply it in two coats before the topcoat, \u003ca href=\"\/en\/products\/feltona-cretezenz-mikrosement-medium-12-kg\"\u003eCretezenz Medium\u003c\/a\u003e or \u003ca href=\"\/en\/products\/feltona-cretezenz-mikrosement-fin-12-kg\"\u003eCretezenz Fine\u003c\/a\u003e. Base provides a rough surface that the next layer adheres well to.\u003c\/p\u003e\n\u003cp\u003eBase has a coarse texture and bonds well, so it can also be used as a filler. Fill joints, small uneven areas and minor defects in the substrate with Base before applying the first coat. To work faster, you can use the quick-setting \u003ca href=\"\/en\/products\/quick-rep-sparkel-10kg\"\u003eFeltona Quick Rep\u003c\/a\u003e together with Base.\u003c\/p\u003e\n\u003cp\u003eIn some cases, Base can also be used as a topcoat if you want a rougher, more rustic finish with a more pronounced texture.\u003c\/p\u003e\n\u003cp\u003eThis tub contains 12 kg. Base is also available in \u003ca href=\"\/en\/products\/feltona-cretezenz-mikrosement-base-4-kg\"\u003e4 kg\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eHow to build up the surface\u003c\/h3\u003e\n\u003col\u003e\n\n\u003cli\u003e\n\n\u003ca href=\"\/en\/products\/feltona-primer-z-1kg\"\u003eFeltona Primer Z\u003c\/a\u003e. On floors, use \u003ca href=\"\/en\/products\/feltona-epoxy-primer-dt-0-8-kg-a-b\"\u003eFeltona Epoxy Primer DT\u003c\/a\u003e.\u003c\/li\u003e\n\n\u003cli\u003eTwo coats of Cretezenz Base.\u003c\/li\u003e\n\n\u003cli\u003eTwo coats of \u003ca href=\"\/en\/products\/feltona-cretezenz-mikrosement-medium-12-kg\"\u003eCretezenz Medium\u003c\/a\u003e or \u003ca href=\"\/en\/products\/feltona-cretezenz-mikrosement-fin-12-kg\"\u003eCretezenz Fine\u003c\/a\u003e.\u003c\/li\u003e\n\n\u003cli\u003eTwo coats of \u003ca href=\"\/en\/products\/feltona-2-komponent-pu-matt-lakk-2-kg-a-b\"\u003eFeltona 2-component PU Matt Varnish\u003c\/a\u003e.\u003c\/li\u003e\n\n\n\u003c\/ol\u003e\n\u003cp\u003eTwo coats of Base use approx. 1.8 kg per m², including joints and 10% waste. One 12 kg tub covers approx. 6.6 m². The \u003ca href=\"\/en\/pages\/mikrosement-kalkulator\"\u003emicrocement calculator\u003c\/a\u003e works out all the materials you need for your area, and the \u003ca href=\"\/en\/pages\/slik-legger-du-mikrosement\"\u003eguide\u003c\/a\u003e shows you each step. If you want to buy everything together, there are \u003ca href=\"\/en\/collections\/mikrosement#pakker\"\u003epackages for 4, 11 and 24 m²\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eColour\u003c\/h3\u003e\n\u003cp\u003eBase is coloured with pigment added before use. Choose one of the 17 standard colours in the \u003ca href=\"\/en\/pages\/mikrosement-fargekart\"\u003ecolour chart\u003c\/a\u003e, or provide an NCS code. We mix over 3,500 NCS colours on request. Enter the colour in the Order instructions field in your cart. Mixing to an NCS code provides an approximation, so view a physical sample before covering large areas.\u003c\/p\u003e\n\u003ch3\u003eSubstrate\u003c\/h3\u003e\n\u003cp\u003eThe substrate must be firm, stable and dry, with the correct preparation and system build-up. Existing tiles are a common substrate. OSB and plasterboard require a specific assessment before you start.\u003c\/p\u003e\n\u003ch3\u003eBathrooms and wet rooms\u003c\/h3\u003e\n\u003cp\u003eCretezenz is a surface finish. In wet rooms, a waterproofing membrane must be installed underneath wherever wet-room requirements call for one. Read more about \u003ca href=\"\/en\/pages\/mikrosement-bad\"\u003emicrocement in bathrooms\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eWhen Aquapro boards are used on walls, the supplier has approved Cretezenz as a topcoat on Aquapro Light. Total and Ultralight are not covered, and this approval is not a SINTEF Technical Approval. See \u003ca href=\"\/en\/pages\/aquapro\"\u003eAquapro Light\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eCretezenz is not intended for swimming pools or surfaces that are constantly exposed to water, and we do not recommend it for outdoor use.\u003c\/p\u003e","brand":"Zenzorama","offers":[{"title":"Default Title","offer_id":46562971811978,"sku":"2k2001","price":2388.0,"currency_code":"NOK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/4739\/0602\/files\/feltona-cretezenz-base-12-kg-mikrosement.png?v=1794181694"},{"product_id":"feltona-cretezenz-pakkelosning-4-5-kvm","title":"Microcement kit for 4 m²","description":"\u003ch2\u003eFeltona Cretezenz 4 m² package\u003c\/h2\u003e\u003cp\u003eComplete material package for a standard microcement application covering 4 m². Tools and any additional substrate preparation (reinforcement mesh, joint filling, membrane) are not included.\u003c\/p\u003e\u003ch3\u003eThe package contains\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003e1 × Feltona Primer Z 1 kg\u003c\/li\u003e\n\n\u003cli\u003e1 × Feltona Cretezenz Base 12 kg\u003c\/li\u003e\n\n\u003cli\u003e1 × Feltona Cretezenz Medium 4 kg\u003c\/li\u003e\n\n\u003cli\u003e1 × Feltona 2-component PU Matt varnish 1 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eCoverage and consumption\u003c\/h3\u003e\u003cp\u003eThe standard application consists of 1 coat of Feltona Primer Z, 2 coats of Cretezenz Base, 2 coats of Cretezenz Medium, and 2 coats of PU varnish. The quantities are calculated based on the standard consumption rates from the microcement calculator: 0.1 kg\/m² Primer Z, 1.8 kg\/m² Base, and 0.9 kg\/m² Medium (total for 2 coats), and 0.25 kg\/m² varnish (total for 2 coats).\u003c\/p\u003e\u003cp\u003eThe package is designed for 4 m² based on standard consumption, and waste is included in the consumption figures. Actual consumption may increase with uneven substrates, deep joints, coarse texture, or inexperienced application. If you are unsure, check your requirements in the \u003ca href=\"\/en\/pages\/mikrosement-kalkulator\"\u003emicrocement calculator\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eAbout the primer\u003c\/h3\u003e\u003cp\u003eThe package contains Feltona Primer Z, the standard primer in the Cretezenz system. Feltona Epoxy Primer DT is a special option for non-porous or difficult substrates and in cases of moisture risk—it is not included in the package and can be purchased separately if needed.\u003c\/p\u003e\u003cp\u003eSpecify the desired color and texture in the comments field when ordering. The package draws from the stock of the individual components.\u003c\/p\u003e","brand":"Feltona","offers":[{"title":"Default Title","offer_id":49754982580362,"sku":"4-5kvmpakke-bundle","price":5223.0,"currency_code":"NOK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/4739\/0602\/files\/Feltona-Cretezenz-pakke-4-5-m2.png?v=1794177861"},{"product_id":"feltona-cretezenz-pakkelosning-11-13-kvm","title":"Microcement kit for 11 m²","description":"\u003ch2\u003eFeltona Cretezenz package solution 11 m²\u003c\/h2\u003e\u003cp\u003eComplete material package for standard microcement application on 11 m². Tools and any additional substrate preparation (reinforcement mesh, joint filling, membrane) are not included.\u003c\/p\u003e\u003ch3\u003eThe package contains\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003e1 × Feltona Primer Z 1 kg\u003c\/li\u003e\n\n\u003cli\u003e2 × Feltona Cretezenz Base 12 kg\u003c\/li\u003e\n\n\u003cli\u003e1 × Feltona Cretezenz Medium 12 kg\u003c\/li\u003e\n\n\u003cli\u003e1 × Feltona 2-component PU Matt varnish 2 kg (A+B)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eCoverage and consumption\u003c\/h3\u003e\u003cp\u003eStandard application consists of 1 coat of Feltona Primer Z, 2 coats of Cretezenz Base, 2 coats of Cretezenz Medium, and 2 coats of PU varnish. The quantities are calculated based on the standard consumption from the microcement calculator: 0.1 kg\/m² Primer Z, 1.8 kg\/m² Base, and 0.9 kg\/m² Medium (total for 2 coats), and 0.25 kg\/m² varnish (total for 2 coats).\u003c\/p\u003e\u003cp\u003eThe package is calculated for 11 m² with standard consumption, and waste is included in the consumption figures. Actual consumption may increase with uneven substrates, deep joints, coarse texture, or inexperienced application. If you are unsure, check your requirements in the \u003ca href=\"\/en\/pages\/mikrosement-kalkulator\"\u003emicrocement calculator\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eAbout the primer\u003c\/h3\u003e\u003cp\u003eThe package contains Feltona Primer Z, the standard primer in the Cretezenz system. Feltona Epoxy Primer DT is a special choice for dense or difficult substrates and in case of moisture risk - it is not included in the package and can be purchased separately if needed.\u003c\/p\u003e\u003cp\u003eSpecify the desired color and texture in the comment field when ordering. The package deducts stock from the individual components.\u003c\/p\u003e","brand":"Feltona","offers":[{"title":"Default Title","offer_id":49754982613130,"sku":"11-13kvmpakke-bundle","price":9950.0,"currency_code":"NOK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/4739\/0602\/files\/Feltona-Cretezenz-pakke-11-13-m2.png?v=1794177861"},{"product_id":"feltona-cretezenz-pakkelosning-24-26-kvm","title":"Microcement kit for 24 m²","description":"\u003ch2\u003eFeltona Cretezenz package solution 24 m²\u003c\/h2\u003e\u003cp\u003eComplete material package for standard microcement application on 24 m². Tools and any additional substrate preparation (reinforcement mesh, joint filling, membrane) are not included.\u003c\/p\u003e\u003ch3\u003eThe package contains\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003e3 × Feltona Primer Z 1 kg\u003c\/li\u003e\n\n\u003cli\u003e4 × Feltona Cretezenz Base 12 kg\u003c\/li\u003e\n\n\u003cli\u003e2 × Feltona Cretezenz Medium 12 kg\u003c\/li\u003e\n\n\u003cli\u003e1 × Feltona 2-component PU Matt varnish 4.3 kg (A+B)\u003c\/li\u003e\n\n\u003cli\u003e1 × Feltona 2-component PU Matt varnish 2 kg (A+B)\u003c\/li\u003e\n\n\u003cli\u003e1 × Feltona 2-component PU Matt varnish 1 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eCoverage and consumption\u003c\/h3\u003e\u003cp\u003eStandard application consists of 1 coat of Feltona Primer Z, 2 coats of Cretezenz Base, 2 coats of Cretezenz Medium, and 2 coats of PU varnish. The quantities are calculated based on the standard consumption from the microcement calculator: 0.1 kg\/m² Primer Z, 1.8 kg\/m² Base, and 0.9 kg\/m² Medium (total for 2 coats), and 0.25 kg\/m² varnish (total for 2 coats).\u003c\/p\u003e\u003cp\u003eAt standard consumption, the contents cover approx. 26.6 m² - the package therefore covers the entire area of 24 m² without any additional safety margin. Actual consumption may increase with uneven substrates, deep joints, coarse texture, or inexperienced application. A 10% safety margin is not necessarily included - check your requirements in the \u003ca href=\"\/en\/pages\/mikrosement-kalkulator\"\u003emicrocement calculator\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eAbout the primer\u003c\/h3\u003e\u003cp\u003eThe package contains Feltona Primer Z, the standard primer in the Cretezenz system. Feltona Epoxy Primer DT is a special choice for dense or difficult substrates and in cases of moisture risk - it is not included in the package and can be purchased separately if needed.\u003c\/p\u003e\u003cp\u003eSpecify the desired color and texture in the comment field when ordering. The package draws from the stock of the individual components.\u003c\/p\u003e","brand":"Feltona","offers":[{"title":"Default Title","offer_id":49754982678666,"sku":"24-26kvmpakke-bundle","price":19250.0,"currency_code":"NOK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/4739\/0602\/files\/Feltona-Cretezenz-pakke-24-26-m2.png?v=1790709161"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/4739\/0602\/collections\/mikrosement_pakkelosning_20-25_kvm.jpg?v=1755035187","url":"https:\/\/zenzorama.no\/en\/collections\/feltona-cretezenz-pakkelosning.oembed","provider":"Zenzorama","version":"1.0","type":"link"}