{"product_id":"feltona-2-komponent-pu-lakk-1-kg","title":"Feltona 2-Component PU Matt Lacquer 1 kg","description":"\u003cdiv class=\"QfrfFD cell\"\u003e\n\n\u003ch1 class=\"OXQzmM tegUPA k7bY4q\" data-hook=\"product-title\"\u003eFeltona 2-Component PU Matt Lacquer\u003c\/h1\u003e\n\n\n\u003c\/div\u003e\n\u003cdiv class=\"QfrfFD cell\"\u003e\n\n\u003cdiv class=\"\" data-hook=\"slot-placeholder-TPAMultiSection_l0cz3lnn.product-page-details-1\" id=\"TPAMultiSection_l0cz3lnn.product-page-details-1\"\u003e\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\u003cdiv class=\"w0gcbV QfrfFD cell\"\u003e\n\n\u003cdiv class=\"\" data-hook=\"slot-placeholder-TPAMultiSection_l0cz3lnn.product-page-details-slot-1\" id=\"TPAMultiSection_l0cz3lnn.product-page-details-slot-1\"\u003e\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\u003cdiv class=\"Djc8mM QfrfFD cell\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"QfrfFD cell\"\u003e\n\n\u003cdiv class=\"\" data-hook=\"slot-placeholder-TPAMultiSection_l0cz3lnn.product-page-details-2\" id=\"TPAMultiSection_l0cz3lnn.product-page-details-2\"\u003e\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\u003cdiv class=\"OtfKGl QfrfFD cell\"\u003e\n\n\u003csection class=\"Va_ZoC\" data-hook=\"description-wrapper\"\u003e\n\u003cdiv class=\"LvOu6J\"\u003e\n\n\u003cdiv data-hook=\"content-wrapper\" class=\"vaI0UH undefined\"\u003e\n\n\u003cp\u003eFeltona 2-Component PU Matt is a solvent-free, matt polyurethane topcoat with good durability, scratch resistance, and UV stability. Feltona 2-Component PU Matt is intended as a topcoat for use on concrete, wood, microcement, and thermosetting plastics.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cu\u003e\u003cstrong\u003eDirections for Use\u003c\/strong\u003e\u003c\/u\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cu\u003eSurface Preparation\u003c\/u\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe substrate must be solid, clean, dry, and free of grease. Clean with House Wash or Floor Cleaner. Maximum residual moisture in the substrate: 4%. The surface temperature must be at least +12 °C at the time of application and at least 3 °C above the current dew point.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cu\u003eMixing and Application\u003c\/u\u003e\u003c\/p\u003e\n\n\u003cp\u003eParts A and B should have a temperature above +12°C when mixed. First, stir Part A with a low-speed drill, then add Part B. Mix thoroughly for at least 3 minutes until the mixture is homogeneous. Pour the mixture into a new bucket. Use a sieve to remove any sludge. The mixture must be used immediately. Apply with a roller or airless sprayer at a thickness of 0.15–0.20 kg\/m² per m². Feltona 2-Component PU Matt can be applied in multiple coats for increased strength and wear resistance.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cu\u003eCuring Time\u003c\/u\u003e\u003c\/p\u003e\n\n\u003cp\u003eFeltona 2-Component PU Matt is fully cured after 6 days and must not be exposed to water, chemicals, or mechanical wear until full curing has been achieved.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cu\u003eStorage\u003c\/u\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe product must be stored in accordance with national regulations. The packaging must be kept tightly closed and stored dry at a uniform temperature. The product should be transported and stored upright, dry, and frost-free.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cu\u003eWaste Management\u003c\/u\u003e\u003c\/p\u003e\n\n\u003cp\u003eLiquid paint and lacquer must not be poured into drains or into the environment, but must be delivered to an approved hazardous waste facility.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cu\u003eOther Information\u003c\/u\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe lacquer is not frost-resistant. Do not use different batch numbers in the same coat, as this may lead to shade differences.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cu\u003eSafety\u003c\/u\u003e\u003c\/p\u003e\n\n\u003cp\u003eSee the safety data sheet. Read the information on the packaging. The product may cause allergic reactions and respiratory tract damage. Use gloves and respiratory protection.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cu\u003e\u003cstrong\u003eUsage Data\u003c\/strong\u003e\u003c\/u\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eColor: Clear base, transparent matt\u003c\/p\u003e\n\n\u003cp\u003eApplication method: Apply with a roller or airless sprayer\u003c\/p\u003e\n\n\u003cp\u003eCleaning agent: Water or polyurethane cleaner. Cured product is removed mechanically\u003c\/p\u003e\n\n\u003cp\u003eThinning: Must not be thinned\u003c\/p\u003e\n\n\u003cp\u003eRecommended coverage: Approx. 0.15-0.20 kg\/m²\u003c\/p\u003e\n\n\u003cp\u003eNumber of coats: 2-3\u003c\/p\u003e\n\n\u003cp\u003eDust dry: 6 hours (20°C, 505 R.H.)\u003c\/p\u003e\n\n\u003cp\u003eFoot traffic resistance: 24 hours (20°C, 505 R.H.)\u003c\/p\u003e\n\n\u003cp\u003eApplication temperature: From +12°C to +30°C in the substrate and air, and at least 3 °C above the current dew point.\u003c\/p\u003e\n\n\u003cp\u003eCuring time: 6 days\u003c\/p\u003e\n\n\u003cp\u003eShelf life: 18 months in unopened packaging at normal storage temperature\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eThe product must not be used on damp substrates or exposed to moisture before curing.\u003c\/p\u003e\n\n\n\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\n\u003c\/section\u003e\n\n\u003c\/div\u003e","brand":"Feltona","offers":[{"title":"Default Title","offer_id":46099871236234,"sku":"10119","price":990.0,"currency_code":"NOK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/4739\/0602\/files\/feltona-pu-matt-lakk-1-kg-etikett.png?v=1794214633","url":"https:\/\/zenzorama.no\/en\/products\/feltona-2-komponent-pu-lakk-1-kg","provider":"Zenzorama","version":"1.0","type":"link"}