{"product_id":"feltona-2-komponent-pu-matt-lakk-2-kg-a-b","title":"Feltona 2-component PU, matte lacquer 2 kg (A+B)","description":"\u003cdiv class=\"QfrfFD cell\"\u003e\n\n\u003ch1 class=\"OXQzmM tegUPA k7bY4q\" data-hook=\"product-title\"\u003eFeltona PU Matt Varnish\u003c\/h1\u003e\n\n\n\u003c\/div\u003e\n\u003cdiv class=\"QfrfFD cell\"\u003e\n\n\u003cdiv class=\"\" data-hook=\"slot-placeholder-TPAMultiSection_l0cz3lnn.product-page-details-1\" id=\"TPAMultiSection_l0cz3lnn.product-page-details-1\"\u003e\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\u003cdiv class=\"w0gcbV QfrfFD cell\"\u003e\n\n\u003cdiv class=\"\" data-hook=\"slot-placeholder-TPAMultiSection_l0cz3lnn.product-page-details-slot-1\" id=\"TPAMultiSection_l0cz3lnn.product-page-details-slot-1\"\u003e\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\u003cdiv class=\"Djc8mM QfrfFD cell\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"QfrfFD cell\"\u003e\n\n\u003cdiv class=\"\" data-hook=\"slot-placeholder-TPAMultiSection_l0cz3lnn.product-page-details-2\" id=\"TPAMultiSection_l0cz3lnn.product-page-details-2\"\u003e\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\u003cdiv class=\"OtfKGl QfrfFD cell\"\u003e\n\n\u003csection class=\"Va_ZoC\" data-hook=\"description-wrapper\"\u003e\n\u003cdiv class=\"LvOu6J\"\u003e\n\n\u003cdiv data-hook=\"content-wrapper\" class=\"vaI0UH undefined\"\u003e\n\n\u003cp\u003eFeltona 2-component PU matt is a solvent-free, matt polyurethane topcoat with good abrasion resistance, scratch resistance and UV stability. Feltona 2-component PU matt is intended as a topcoat for use on concrete, wood, microcement and cured plastic.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cu\u003e\u003cstrong\u003eInstructions for use\u003c\/strong\u003e\u003c\/u\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cu\u003eSurface preparation\u003c\/u\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe substrate must be sound, clean, dry and free of grease. Clean with Husvask or Gulvrens. Maximum residual moisture in the substrate: 4%. The surface temperature must be at least +12 °C during application and at least 3 °C above the current dew point.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cu\u003eMixing and application\u003c\/u\u003e\u003c\/p\u003e\n\n\u003cp\u003eParts A and B should be above +12°C when mixed. First stir Part A using a slow-speed drill, then add Part B. Mix thoroughly for at least 3 minutes until homogeneous. Pour the mixture into a new bucket. Use a strainer to remove any residue. The mixture must be used immediately. Apply with a roller or airless sprayer at a thickness of 0.15–0.20 kg\/m2 per m2. Feltona 2-component PU matt can be applied in several coats for increased strength and wear resistance.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cu\u003eCuring time\u003c\/u\u003e\u003c\/p\u003e\n\n\u003cp\u003eFeltona 2-component PU matt is fully cured after 6 days and must not be exposed to water spills, chemicals or mechanical wear before fully cured.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cu\u003eStorage\u003c\/u\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe product must be stored in accordance with national regulations. Keep the packaging tightly closed and store in a dry place at a stable temperature. The product must be transported and stored upright, dry and frost-free.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cu\u003eWaste disposal\u003c\/u\u003e\u003c\/p\u003e\n\n\u003cp\u003eLiquid paint and varnish must not be poured into drains or released into the environment, but must be taken to an approved hazardous waste facility.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cu\u003eOther information\u003c\/u\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe varnish is not frost-resistant. Do not use different batch numbers in the same coat, as this may cause colour differences.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cu\u003eSafety\u003c\/u\u003e\u003c\/p\u003e\n\n\u003cp\u003eSee the separate safety data sheet. Read the information on the packaging. The product may cause allergies and respiratory damage. Wear gloves and respiratory protection.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cu\u003e\u003cstrong\u003eApplication data\u003c\/strong\u003e\u003c\/u\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eColour: Clear base, transparent matt\u003c\/p\u003e\n\n\u003cp\u003eApplication method: Apply with a roller or airless sprayer\u003c\/p\u003e\n\n\u003cp\u003eCleaning agent: Water or polyurethane cleaner. Cured product must be removed mechanically\u003c\/p\u003e\n\n\u003cp\u003eThinning: Do not thin\u003c\/p\u003e\n\n\u003cp\u003eRecommended coverage: Approx. 0.15–0.20 kg\/m2\u003c\/p\u003e\n\n\u003cp\u003eNumber of coats: 2–3\u003c\/p\u003e\n\n\u003cp\u003eDust-dry: 6 hours (20°C, 50% R.H.)\u003c\/p\u003e\n\n\u003cp\u003eSuitable for foot traffic: 24 hours (20°C, 50% R.H.)\u003c\/p\u003e\n\n\u003cp\u003eApplication temperature: From +12°C to +30°C for the substrate and air, and at least 3 °C above the current dew point.\u003c\/p\u003e\n\n\u003cp\u003eCuring time: 6 days\u003c\/p\u003e\n\n\u003cp\u003eShelf life: 18 months in unopened packaging at normal storage temperature\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eThe product must not be used on a damp substrate or exposed to moisture before curing.\u003c\/p\u003e\n\n\n\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\n\u003c\/section\u003e\n\n\u003c\/div\u003e","brand":"Feltona","offers":[{"title":"Default Title","offer_id":46099759726730,"sku":"10117","price":2196.0,"currency_code":"NOK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/4739\/0602\/files\/feltona-pu-matt-lakk-2-kg-etikett.png?v=1794214644","url":"https:\/\/zenzorama.no\/en\/products\/feltona-2-komponent-pu-matt-lakk-2-kg-a-b","provider":"Zenzorama","version":"1.0","type":"link"}