{"product_id":"feltona-epoxy-primer-dt-13-4-kg-a-b","title":"Feltona Epoxy Primer DT 13.4 kg (A+B)","description":"\u003cp\u003eFeltona Epoxy Primer DT is a primer for floors where you are unsure about the moisture content of the substrate, for example a tiled floor. We recommend it for bathroom floors and self-levelling compound.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eEpoxy Primer DT is a two-component, solvent-free primer. Epoxy Primer DT is intended for use on mineral substrates such as concrete, masonry, render and tiles. Apply to untreated substrates before further treatment with epoxy, polyurethane or microcement. Epoxy Primer DT is particularly suitable for concrete with surface moisture. It must be broadcast with sand.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cu\u003e\u003cstrong\u003eTechnical data: \u003c\/strong\u003e\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Clear, yellowish\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication method:\u003c\/strong\u003e Squeegee, rubber squeegee or notched trowel. A roller may also be used\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCleaning agent:\u003c\/strong\u003e Xylene or isopropanol. Cured product can only be removed mechanically.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThinning:\u003c\/strong\u003e The product must not be thinned.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended coverage:\u003c\/strong\u003e Approx. 0.2–0.4 kg\/m2, depending on the substrate\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePot life:\u003c\/strong\u003e 50 min. Should be used immediately after parts A and B have been mixed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDust-dry:\u003c\/strong\u003e 2 hours (20°C, 50% R.H.)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum overcoating time:\u003c\/strong\u003e 48 hours (20°C, 50% R.H.)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication temperature:\u003c\/strong\u003e From +12°C to +30°C for both the substrate and air, and at least 3°C above the prevailing dew point.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCuring time:\u003c\/strong\u003e 5–7 days\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShelf life:\u003c\/strong\u003e 2 years in unopened packaging at normal storage temperature\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cu\u003e\u003cstrong\u003eInstructions for use\u003c\/strong\u003e\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cu\u003ePreparation\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003eThe substrate must be sound, clean, dry and free of grease. Maximum residual moisture in the substrate: 5% (95% R.H.). Minimum concrete grade: C25. Prepare concrete by grinding, milling, shot blasting or sandblasting. Vacuum the surface thoroughly afterwards.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eMixing and application\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003ePour part B into part A and mix thoroughly for 3–4 min. using a slow-speed drill with a mixing paddle. The mixture must be used immediately. Apply evenly and generously with a squeegee, rubber squeegee or notched trowel. The minimum application temperature is +12°C; this applies to both the substrate and the air. The product temperature must be above +15°C during use. After application, all pores must be filled and the surface should appear sealed, with no dry patches. This is important to prevent air bubbles in the topcoat. The topcoat must be applied within 48 hours. If this time interval is exceeded, the surface must be lightly sanded to ensure adequate adhesion. Sand may be broadcast onto the primer to improve adhesion between the products. \u003c\/p\u003e","brand":"Feltona","offers":[{"title":"Default Title","offer_id":46099667845258,"sku":"10116","price":7125.0,"currency_code":"NOK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/4739\/0602\/files\/feltona-epoxy-primer-dt-13-4-kg.png?v=1794181945","url":"https:\/\/zenzorama.no\/en\/products\/feltona-epoxy-primer-dt-13-4-kg-a-b","provider":"Zenzorama","version":"1.0","type":"link"}