Rune Haraldsen’s microcement tips

Why choose microcement, how to tell if the job is well or poorly done, and how much does microcement cost?

Rune Haraldsens mikrosement-tips

Why choose microcement?

Look around the world and back through time, and you will find that walls and floors have been finished with plaster. There are many different types of decorative plaster. What they all have in common are fantastic solutions with different qualities, appearances and textures.
 

Microcement has its origins in these older types of plaster. Here in the Nordic countries, we have mostly chosen to cover surfaces in other ways. We are very fond of wood, wallpaper, plasterboard and tiles. All these surfaces are very attractive, but other countries have been far ahead of us in their use of plastered surfaces.

Microcement is far more adaptable than other types of masonry plaster. The ability to choose from a wide range of colours and textures makes microcement a product that will last-just as comparable plasters have done for thousands of years in other countries. Microcement also means no grout or silicone transitions, giving a more unified look with seamless, clean lines. The product’s compressive strength also makes it suitable for floors, façades, terraces and similar surfaces. Microcement is simply a fantastic product that is finally here to stay. It makes homes more beautiful.

 


How can you tell if microcement work has been done well or poorly?

I have seen many beautiful and unusual ways of applying microcement. One thing is certain: this is a craft, and ultimately, no one can say that it has been applied incorrectly. But if you want a particular look and get something completely different, you are entitled to be dissatisfied. You wouldn’t buy a tile in a shop because of its particular appearance, only to receive something that looks nothing like it. First and foremost, it’s about communication. You need to agree on what the finish should look like, and then understand how to achieve the desired appearance. So make sure that you, as the customer, and the tradesperson agree on the colours and appearance. There will always be some variation, as this is a craft. But within certain limits, you should get the result that you and the tradesperson agreed on after looking at the samples.  

Wall with rust-effect microcement, an orange-brown textured surface with light from above

Metal-effect microcement: rust, copper, aluminium and bronze

Metal effects are available in several different variations. These include iron, which creates a rust effect, as well as copper, brass, aluminium, silver and bronze. Each is applied using different techniques to achieve the most authentic results. 

 

Rust-effect microcement: 

This uses iron filings that are added to, or substituted for, cement in the products. It can be applied in several different ways, but for better control, it is applied in thin layers. An activator is supplied and applied to accelerate the rust effect. The iron can also be left outdoors in the open air to corrode.

 

Copper-effect microcement: 

There are many different ways to achieve the perfect copper look. There is no single right way, so experiment with the activator in the first layer before applying the second. This can create patina from within.

 

Aluminium/silver-effect microcement: 

Apply using a soft trowel in long, smooth strokes. This is one of the hardest products to sand, but do not use sandpaper finer than 400 grit. This will give you the smooth surface that reflects aluminium.
 

Bronze-effect microcement: 

This microcement product is the most similar to standard microcement. Apply it in thin layers with a soft trowel to bring out the smooth finish that best suits the product.

Vil du ha hjelp med prosjektet?

Send oss mål og bilder, så får du råd og et uforpliktende pristilbud. Gratis befaring i Oslo-området, ellers videosamtale.