Cemher: Microcement at trade prices,
from primer to varnish.
Primer, microcement, varnish and decorative finishes at Zenzorama. Companies log in with Zenzorama Proff and see their prices excl. VAT.
Cemher in figures
- 1940
- The parent company Kilnher has roots going back to 1940. A third-generation family company.
- Source: Kilnher
- 33
- products in four families at Zenzorama, from primer to varnish.
- A+
- Microne has class A+ for emissions to indoor air, according to EN 16516.
- Source: Cemher's data sheet
What microcement is used for
The surface is built layer by layer.
Primer, microcement and varnish are applied in that order. Choose the layer and see the products, or calculate the quantity for the job.
See all 33 products layer by layerPrimers and preparation
Step 1 in the build-up
The primers prepare the substrate for microcement. They provide adhesion, consolidate a weak substrate or block rising moisture, and sit at the bottom of the build-up, under the base coat.
Primer 100

CompactecConsolidates a weak, dusty or porous substrate before primer, when the concrete or render is not strong enough. 
AquasellWater-based epoxy primer that blocks rising moisture, for substrates with up to 7 % moisture. 
ImpripoxSolvent-based epoxy primer that blocks moisture in absorbent substrates with up to 5 % moisture.
Microcement and colour
Step 2 in the build-up
The microcement is the surface itself: a thin, jointless layer on floors, walls and furniture, applied as base coats and finish coats. The colour is mixed into the material on site.
In stockMicrone

MicrodurMineral microcement in powder form that is mixed with water. The most grain sizes, from ultra-fine to extra coarse. 
MicroduoClassic 2-component microcement: powder and liquid. Good working time and a clear trowel character. 
MicroröckThe hardest line: paste and hardener for floors and walls with heavy wear indoors.
Varnish and maintenance
Step 3 in the build-up
The varnish is the outermost layer. It seals the microcement, takes the wear and makes the surface easy to keep clean.
Aquamax Pro

HydroprimerSaturates finished microcement before the varnish, so the varnish lies evenly and the colour holds. 
Aquapur 70The hardest water-based varnish in the range, for floors and walls with heavy wear, in three sheen levels. 
MaxipurSolvent-based 2-component PU varnish for very heavy wear, in three versions from thick to thin.
Decorative finishes and epoxy
Cemher makes more than microcement. Here you will find clay and lime plasters, real metal and rust coatings, micro-terrazzo and design floors, and clear epoxy.
Metalresin Polish

Clay StoneMineral decorative plaster with a stone look for walls, ceilings, furniture and counters. Applied in thin layers of 1 to 3 mm. 
Decolevel FloorSelf-levelling cement-based design floor of 3 to 7 mm that gives a seamless, mineral floor indoors. 
Epoxi 3D FloorClear, glossy epoxy of 1 to 2 mm for 3D floors, floors and worktops. Can be tinted with Cemher pigment.
Trade prices with Zenzorama Proff.
With an account at Zenzorama Proff, your company sees its prices excl. VAT. If you do not have an account, you apply on the same page.
Feltona Cretezenz is our own microcement, and with Aquapro Light it becomes a system for bathrooms and wet rooms, with ready-made kits, courses and laying instructions. Cemher is a full trade range of 33 products from primer to varnish, for those who want to put the system together themselves.












