Aquasell component A (large can) and component B (small can)

Aquasell

Water-based epoxy primer against moisture

Water-based epoxy primer that blocks rising moisture, for substrates with up to 7 % moisture.

Made to order

A company? Log in to Zenzorama Proff and see your price excl. VAT.

Max moisture in the substrate
7 % (surface moisture)
Mixing ratio
100 parts component A : 40 parts hardener, by volume
Pot life
approx. 60 minutes at 20 °C (90 minutes at 10 °C, 30 minutes at 30 °C)
Dust-dry
5 to 6 hours at 23 °C
Next coat
within 3 days at 23 °C at the latest
Fully cured
after 7 days
Adhesion to concrete
over 2 N/mm²
Consumption
approx. 8 m² per litre
Substrate requirements
compressive strength at least 25 N/mm², cement render cured for at least 28 days
Packaging
5 L + 2 L

About Aquasell

Aquasell is a water-based 2-component epoxy without organic solvents. It is applied on damp cement-based substrates and stops moisture rising through the substrate. It tolerates damper substrates than Impripox. Quartz sand is not broadcast into Aquasell.

Choose when
When the substrate has more moisture than Impripox tolerates, up to 7 %, or there is a risk of rising damp.
Place in the build-up
On a damp, cured substrate before the rest of the build-up. Applied under Epoxy BV when the substrate is damp.

Good to know

  • Aquasell stops moisture from the substrate, but it is not a waterproofing membrane. In wet rooms, the membrane is part of the build-up as usual.
  • Quartz sand must not be broadcast into Aquasell.