Microcement and colour
The microcement is the surface itself: a thin, jointless layer on floors, walls and furniture, applied as base coats and finish coats. The colour is mixed into the material on site.

8 products
Cemher makes several microcement lines. They differ in how they are mixed, what they withstand and what they are made for: Microne is ready-mixed, Microdur and Microlevel are mixed with water, Microduo with a dedicated liquid, and Microröck with hardener. The grain size is a separate choice: coarse grain in the base coats, and coarse, medium or fine grain in the finish coat, depending on the look you want. The colour is made by adding pigment to the material before use. Microne is the line we keep in stock. We order the other lines in for each project.
Lines
-
MicroneReady-mixed microcement
Ready-mixed microcement that is tinted and applied straight from the bucket. The Plus version with hardener is for floors.
In stock
-
MicrodurMicrocement powder mixed with water
Mineral microcement in powder form that is mixed with water. The most grain sizes, from ultra-fine to extra coarse.
Made to order
-
Microduo2-component cement-based microcement
Classic 2-component microcement: powder and liquid. Good working time and a clear trowel character.
Made to order
-
Microröck2-component polymer-based microcement
The hardest line: paste and hardener for floors and walls with heavy wear indoors.
Made to order
-
MicrolevelEasy-levelling microcement for floors
Microcement for floors that is mixed with water and levels out slightly by itself, without being self-levelling.
Made to order
Colour and pigment
-
TintesColour pigment for mixing in
The colour system for the colour chart: 40 numbered pigments that are mixed into the microcement before use.
Made to order
-
ConcentradosConcentrated inorganic pigment
14 concentrated, lightfast pigments for Cemher's water-based products. A smaller, basic selection.
Made to order
-
Stone EffectSurface pigment for a stone look
Pigment that is applied on top of finished microcement or concrete and gives a mottled, natural stone look.
Made to order
Which microcement when
| Situation | Choose | Why |
|---|---|---|
| You want a ready-to-use material, on walls, ceilings, furniture and worktops, also in bathrooms. | Microne | It is opened, tinted and applied without mixing, has no pot life, and Cemher states that the material is watertight even without varnish. |
| Floors, including with underfloor heating or chairs on castors, with the same simple material as Microne. | Microne Plus | The hardener almost doubles the compressive strength, and the data sheet approves underfloor heating and rolling loads; the pot life becomes 2 hours. |
| A classic mineral look in homes, with simple mixing and the widest choice of grain sizes. | Microdur | The powder is mixed only with water, and the line has five grain sizes, among them Regular, which no other line has. |
| You want good working time and clear trowel clouding in the surface. | Microduo | The powder is mixed with the liquid Resincem, which gives approx. 2 hours pot life against 1 hour for Microdur. |
| Floors and walls with heavy wear indoors, such as shops, warehouses, corridors and garages. | Microröck | It is the hardest line with over 80 N/mm² compressive strength, and withstands many household chemicals. |
| Floors where you want the material to level out slightly by itself under the trowel. | Microlevel | It tends towards an even surface and is therefore easier to apply on floors, but it is not self-levelling. |
Grain sizes and finish
The grain size is chosen per layer: coarse grain in the base coats, and coarse, medium or fine grain in the finish coats.
| Name | Grain | Surface | Used as | Lines |
|---|---|---|---|---|
Fino | Ultra-fine | Clear trowel clouding | Finish | Microne, Microdur, Microduo, Microröck, Microlevel |
Regular | Fine | Light trowel clouding | Finish | Microdur |
Medio | Medium | Even surface without clouding | Finish | Microne, Microdur, Microduo, Microröck, Microlevel |
Base coat | Coarse | Even surface without clouding | Base coat and finish coat | Microne, Microdur, Microduo, Microröck, Microlevel |
Base gruesa | Extra coarse | Coarse, clearly grained surface | Base coat and finish coat | Microdur, Microröck |
Fino continuo | Ultra-fine | Even surface without clouding | Finish | Microröck |
Fino estuco | Ultra-fine | Clear trowel clouding | Finish | Microröck |
Efecto hormigón | Coarse | Concrete look with darker areas in the surface | Walls, furniture and ceilings | To be confirmed when ordering |
Good to know
- In wet rooms, the microcement is applied on top of an approved waterproofing membrane. It is the membrane that seals against water, not the microcement.
- The build-up in wet rooms must follow the Norwegian wet-room standard (våtromsnormen), and we recommend a professional for the membrane work.
- We recommend microcement for indoor use.
- Microcement is not intended for surfaces with constant water.
- Images of colours are for guidance only. Cemher itself says that the colour strength can vary, so make a sample on site.
- Use the same pigment and the same dosage in each bucket, otherwise the colour will be uneven across the surface.
- The figures are Cemher's own and are taken from technical data sheets and product pages; where the sources disagree, we have used the data sheet.
















