Knowledge
For those who apply, specify or order Cemher microcement: guidelines by task, video phase by phase and professional courses.
Guidelines by task.
Agree on the look
- Agree on texture and colour before you start, ideally with a sample board the client has approved.
- Ask for colour samples: tone and texture look different in different light.
- There will always be some variation, as this is handcraft.
Assess the substrate
- Microcement is never stronger than the substrate.
- On tiles and other surfaces with joints: clean thoroughly and remove all silicone in corners and at the floor/wall junction before the primer is applied.
- Wood or MDF? We do not lay microcement on those - they are living materials.
Secure the wet room
- Microcement is a surface, not a waterproofing layer.
- The watertightness of a bathroom comes from an approved waterproofing membrane system laid underneath, in line with current wet-room requirements and installed by a professional.
- In bathrooms, you must assess whether the existing waterproofing membrane is approved and intact. We often recommend a new membrane over the tiles before microcement.
Hand over the surface
- Hard-wearing with the right top varnish: the top varnish determines the wear resistance and makes the surface more resistant to spills, stains and wear.
- The top varnish should be maintained regularly, depending on wear. We provide a maintenance plan for the project.
- The fire class depends on the system and the substrate. Contact us for product documentation for the project.
See the job, phase by phase.
The video follows a tiled bathroom from preparation to varnish, phase by phase.
How to apply microcement - complete step-by-step guide
26 min, opens on YouTube in a new tab
-
Preparing the surface
-
Base coat
-
Finish
-
Varnish
Microne is applied with two base coats and two finish coats.See the build-up step by step
Professional course in Oslo.
A practical one-day course where you hold the steel trowel yourself, and leave with a certificate. For tilers, floor layers, painters, bricklayers and plasterers.
| Content | Substrates and preparation, application and technique, top varnish and wet rooms |
|---|---|
| Format | Four hours, max 8 per course |
| Location | Zenzorama, {% render 'zenz-showroom-adresse' %} |
Course leader Rune Haraldsen has 16 years of experience with microcement and decorative plaster. We can also run courses for the whole company.
Stuck?
Call our support line. After the course, you can send photos and questions when you start your first projects.







