Compactec component A (5 L can) and component B (1 L bottle)

Compactec

Consolidating primer, 2-component epoxy

Consolidates a weak, dusty or porous substrate before primer, when the concrete or render is not strong enough.

Made to order

3 560 kr incl. VAT

Call 400 08 038

A company? Log in to Zenzorama Proff and see your price excl. VAT.

Mixing ratio
5 L component A + 1 L hardener
Consumption
10 to 12 m² per litre per coat
Pot life
approx. 60 minutes at 20 °C (90 minutes at 10 °C, 30 minutes at 30 °C)
Working temperature
5 to 35 °C
Residual moisture in gypsum plaster
max 1 %, measured with a carbide meter
Packaging
5 L + 1 L

About Compactec

Compactec is a water-based 2-component epoxy with low viscosity. It penetrates weak surfaces such as lean cement render, lime plaster and old concrete, binds dust and makes the surface firmer. Cemher requires cement-based substrates to hold at least 1.5 N/mm² in a pull-off test. If they do not, Compactec goes on first.

Choose when
When the substrate crumbles, dusts or does not hold 1.5 N/mm² in a pull-off test.
Place in the build-up
First on the weak substrate. Then Primer 100 and the base coat.

Good to know

  • The substrate must be stable and free of cracks. Compactec consolidates the surface, but does not correct a substrate that moves.
  • On very porous surfaces, several coats are applied wet-on-wet until the surface is saturated.