Impripox component A (large can) and component B (small can)

Impripox

Solvent-based epoxy primer against moisture

Solvent-based epoxy primer that blocks moisture in absorbent substrates with up to 5 % moisture.

Made to order

A company? Log in to Zenzorama Proff and see your price excl. VAT.

Max moisture in the substrate
5 %, measured 2 cm in
Max air humidity
85 % RH
New concrete
at least 1 month old
Mixing ratio
100 : 40 by volume (5 kg + 2 kg)
Consumption
approx. 250 ml per m², one coat
Pot life
45 to 60 minutes
Next layer
after 24 hours at the earliest, within 3 days at the latest
Working temperature
15 to 30 °C

About Impripox

Impripox is a solvent-based 2-component epoxy with 80 % solids. It penetrates concrete, render and other absorbent surfaces and blocks rising moisture. Cemher also uses it against damp stains in tile joints and as a primer under epoxy and PU floor paint. With more than 5 % moisture, choose Aquasell.

Choose when
When an absorbent substrate has some moisture, up to 5 % measured 2 cm in, and new concrete has cured for at least one month.
Place in the build-up
On an absorbent, cured substrate. The next layer is applied after 24 hours at the earliest and within 3 days at the latest.

Good to know

  • Impripox blocks moisture from the substrate, but it is not a waterproofing membrane.
  • Solvent-based. Tools are cleaned with solvent.