Epoxy BV component A (black bucket) and component B (grey bucket)

Epoxy BV

Thick epoxy primer and moisture barrier

Thick epoxy primer and moisture barrier, also over tiles with quartz sand so the joints do not show through.

Made to order

1 965 kr incl. VAT

Call 400 08 038

A company? Log in to Zenzorama Proff and see your price excl. VAT.

Mixing ratio
1 : 1
Consumption
approx. 1 kg per m² per coat
Coats as moisture barrier
1 on non-absorbent, 2 on absorbent substrates, at least 8 hours between
Quartz sand
0.3 to 0.8 mm, approx. 1 kg per m², broadcast into wet primer
Drying time
dust-dry 4 hours, dry 8 hours at 25 °C, fully cured 48 hours
Working temperature
15 to 30 °C
Packaging
4 kg + 4 kg and 8 kg + 8 kg

About Epoxy BV

Epoxy BV is a 2-component epoxy with 100 % solids that flows out and is applied with a trowel. It blocks rising moisture on both absorbent and non-absorbent substrates. Over tiles, it is applied with quartz sand broadcast into the wet coat, so the tile joints do not show through the microcement.

Choose when
Over tiles where the joints may show through, as a moisture barrier on a dry substrate, and before self-levelling screed.
Place in the build-up
Directly on the substrate, after Aquasell if it is damp. Quartz sand is broadcast into the wet coat before the next layer.

Good to know

  • Epoxy BV blocks moisture from the substrate, but it is not a waterproofing membrane.
  • For professional use only. The mix generates a lot of heat and is therefore mixed in small quantities.
  • Before self-levelling screed, it is applied with glass-fibre mesh between two coats and quartz sand in the last one.