

OsloBathroom
From tiles to a single continuous surface. The microcement was applied directly over the old tiles.
Seamless bathrooms, floors and walls installed by our own professionals in Oslo and the surrounding area. See the displays in our showroom, get a home consultation and a fixed-price quote.

Bathrooms and rooms where we have applied microcement. The neighborhood and room are listed on each card; visit the inspiration page for more angles.


OsloBathroom
From tiles to a single continuous surface. The microcement was applied directly over the old tiles.

OsloShower
Light gray wall in the shower area, without grout lines.

OsloToilet
Gray floor against a slatted wall.

OsloBathroom
Slotted ceiling and round mirror above seamless surfaces.


OsloBathroom
Glass building blocks out, seamless surfaces and oak vanity cabinets in.

OsloBathroom
Dark wall and black vanity unit.

Feltona Cretezenz is applied in thin layers, around 3 mm in total, directly over existing tiles or on a membrane board. Each layer has one job.
Mikrosement blir aldri sterkere enn underlaget. Alle flater må være rette, bæredyktige, solide, rene og tørre, med fukt under 10 %. Fliser rengjøres grundig, og all silikon fjernes. Fuger og ujevnheter fylles med base.
Mikrosement er en overflate, ikke en tetning. I våtsoner som dusj ligger tettheten i membransystemet under, bygget etter gjeldende våtromskrav og utført av fagperson. Feltona Cretezenz er godkjent fra leverandør som topplag på Aquapro Light på vegg.* Platen monteres da på et stabilt underlag av rupanel eller finerplate.
Feltona Primer Z på alle flater, tørketid minimum 30 minutter. På gulv og på fuktige eller vanskelige flater brukes Feltona Epoxy primer DT, tørketid 24 timer.
Legges tynt. Første lag tar resten av sparklingen, etter andre lag ser du ikke lenger flisene. Lett sliping og støvtørking mellom lagene.
Feltona Cretezenz Fin eller Medium legges i 1-3 lag, avhengig av strukturen du har valgt. Den vanligste strukturen er Oslo. Fargen blandes etter fargekartet. På vegg legges topplaget også over Aquapro Light.
Feltona PU Lakk i 2 lag beskytter overflaten mot fukt, slitasje og misfarging. Til slutt finpusses flaten lett, så den blir slett og behagelig.
*Godkjenningen er gitt av leverandøren av Feltona Cretezenz for den spesifikke oppbygningen med Aquapro Light på vegg. Den er ikke en SINTEF Teknisk Godkjenning eller ETA og gjelder ikke mikrosement generelt.
From inspection to a fully sealed surface, you have a single point of contact.
We look at the surface, take measurements, and discuss texture and color. Feel free to bring along any pictures you like.
You will receive a written quote with a fixed price. The color is mixed according to the color chart, and you can see a sample area before we start.
The same team from start to finish, through to the final sealed surface. You have one point of contact throughout.
When the area is finished, you will receive documentation on the products and advice on maintenance. If you have any questions afterwards, just give us a call.
We deliver from our showroom in Oslo. If you live outside the areas listed below, please contact us, and we’ll see what we can do.

See the structures and colors in person before you decide. Drop by, or schedule an appointment, and we’ll set aside time for you.
Don't fit the opening hours? Contact us, and we'll find a solution.

Vil du legge mikrosement selv? Se produktene eller bli med på kurs i Oslo.
Regn ut pakke og prisThe price depends on the surface, substrate, and area. If you are going to lay it yourself, the Package Selector calculates quantities and packages. If we are going to do the job, request a site visit, and you will receive a fixed price.
Yes. Microcement is applied over existing tiles on both floors and walls, so you don't have to demolish. The substrate will be assessed during the site visit.
Yes, but microcement is a surface, not a waterproofing system. Wet areas such as showers are constructed with an approved waterproofing membrane system in accordance with current wet room requirements, installed by a qualified professional. Feltona Cretezenz is approved by the supplier as a top layer on Aquapro Light on walls.
It depends on the area and the substrate. Each layer must dry before the next one is applied, so a bathroom normally takes several days. During the site visit, you will receive a schedule for your project.
The surface is washed like other smooth surfaces, without joints where dirt can accumulate. The topcoat should be maintained regularly, depending on wear and tear. You will receive maintenance advice when the work is completed.
No. The inspection and quote are non-binding. We come to your home in Oslo and the surrounding area, look at the room, and provide you with a fixed-price quote.
Send us some pictures and a short description of the room, and we’ll arrange a time that suits you. No obligation.