Feltona 2-Component PU Matt Lacquer 1 kg

990 kr
Inkl. mva. Frakt til hentested fra 190 kr. Gratis henting i Oslo.

På lager

Feltona 2-Component PU Matt Lacquer Feltona 2-Component PU Matt is a solvent-free, matt polyurethane topcoat with good durability, scratch resistance, and UV stability. Feltona 2-Component PU Matt is intended as a topcoat for use on concrete, wood, microcement, and thermosetting plastics.   Directions for Use   Surface Preparation The substrate must be solid, clean, dry, and free of grease. Clean with House Wash or Floor Cleaner. Maximum residual moisture in the substrate: 4%. The surface temperature must be at least +12 °C at the time of application and at least 3 °C above the current dew point.   Mixing and Application Parts A and B should have a temperature above +12°C when mixed. First, stir Part A with a low-speed drill, then add Part B. Mix thoroughly for at least 3 minutes until the mixture is homogeneous. Pour the mixture into a new bucket. Use a sieve to remove any sludge. The mixture must be used immediately. Apply with a roller or airless sprayer at a thickness of 0.15-0.20 kg/m² per m². Feltona 2-Component PU Matt can be applied in multiple coats for increased strength and wear resistance.   Curing Time Feltona 2-Component PU Matt is fully cured after 6 days and must not be exposed to water, chemicals, or mechanical wear until full curing has been achieved.   Storage The product must be stored in accordance with national regulations. The packaging must be kept tightly closed and stored dry at a uniform temperature. The product should be transported and stored upright, dry, and frost-free.   Waste Management Liquid paint and lacquer must not be poured into drains or into the environment, but must be delivered to an approved hazardous waste facility.   Other Information The lacquer is not frost-resistant. Do not use different batch numbers in the same coat, as this may lead to shade differences.   Safety See the safety data sheet. Read the information on the packaging. The product may cause allergic reactions and respiratory tract damage. Use gloves and respiratory protection.   Usage Data   Color: Clear base, transparent matt Application method: Apply with a roller or airless sprayer Cleaning agent: Water or polyurethane cleaner. Cured product is removed mechanically Thinning: Must not be thinned Recommended coverage: Approx. 0.15-0.20 kg/m² Number of coats: 2-3 Dust dry: 6 hours (20°C, 505 R.H.) Foot traffic resistance: 24 hours (20°C, 505 R.H.) Application temperature: From +12°C to +30°C in the substrate and air, and at least 3 °C above the current dew point. Curing time: 6 days Shelf life: 18 months in unopened packaging at normal storage temperature   The product must not be used on damp substrates or exposed to moisture before curing.
Les hele beskrivelsen
Betal enkelt og trygt med Vipps i kassen
  • Levering i post2-7 dager
  • Hent i OsloMandag-fredag i åpningstiden
  • ReturvilkårSe vilkårene som gjelder for denne varen
  • Usikker på mengde?Regn ut i Pakkevelgeren
  • Spørsmål om produktet?Chat med oss - svar med en gang, døgnåpent
Se leverings- og returvilkår

Leggeanvisning

Slik legges Feltona Cretezenz, gulv og vegg på én side

Primer, base, medium og lakk i fire trinn, med tørketider og slipekorn for hvert lag. Pluss det du må gjøre før du starter, og hvor lenge badet må stå før du dusjer.

Trenger du hjelp til å velge, eller regne ut mengde? Få pristilbud → Larger than 40 m²? Get a project price →
Beskrivelse

Feltona 2-Component PU Matt Lacquer


Feltona 2-Component PU Matt is a solvent-free, matt polyurethane topcoat with good durability, scratch resistance, and UV stability. Feltona 2-Component PU Matt is intended as a topcoat for use on concrete, wood, microcement, and thermosetting plastics.

 

Directions for Use

 

Surface Preparation

The substrate must be solid, clean, dry, and free of grease. Clean with House Wash or Floor Cleaner. Maximum residual moisture in the substrate: 4%. The surface temperature must be at least +12 °C at the time of application and at least 3 °C above the current dew point.

 

Mixing and Application

Parts A and B should have a temperature above +12°C when mixed. First, stir Part A with a low-speed drill, then add Part B. Mix thoroughly for at least 3 minutes until the mixture is homogeneous. Pour the mixture into a new bucket. Use a sieve to remove any sludge. The mixture must be used immediately. Apply with a roller or airless sprayer at a thickness of 0.15–0.20 kg/m² per m². Feltona 2-Component PU Matt can be applied in multiple coats for increased strength and wear resistance.

 

Curing Time

Feltona 2-Component PU Matt is fully cured after 6 days and must not be exposed to water, chemicals, or mechanical wear until full curing has been achieved.

 

Storage

The product must be stored in accordance with national regulations. The packaging must be kept tightly closed and stored dry at a uniform temperature. The product should be transported and stored upright, dry, and frost-free.

 

Waste Management

Liquid paint and lacquer must not be poured into drains or into the environment, but must be delivered to an approved hazardous waste facility.

 

Other Information

The lacquer is not frost-resistant. Do not use different batch numbers in the same coat, as this may lead to shade differences.

 

Safety

See the safety data sheet. Read the information on the packaging. The product may cause allergic reactions and respiratory tract damage. Use gloves and respiratory protection.

 

Usage Data

 

Color: Clear base, transparent matt

Application method: Apply with a roller or airless sprayer

Cleaning agent: Water or polyurethane cleaner. Cured product is removed mechanically

Thinning: Must not be thinned

Recommended coverage: Approx. 0.15-0.20 kg/m²

Number of coats: 2-3

Dust dry: 6 hours (20°C, 505 R.H.)

Foot traffic resistance: 24 hours (20°C, 505 R.H.)

Application temperature: From +12°C to +30°C in the substrate and air, and at least 3 °C above the current dew point.

Curing time: 6 days

Shelf life: 18 months in unopened packaging at normal storage temperature

 

The product must not be used on damp substrates or exposed to moisture before curing.

Bruksområde
Egnet bruksområde avhenger av underlag, rom og ønsket finish. Kontakt oss ved tvil.
Frakt og levering
Levering i post: 2-7 dager. Hent i Oslo: mandag-fredag i åpningstiden. Fraktpris beregnes i kassen.
Usikker på hva du trenger? Vi hjelper deg med riktig produkt og mengde.

Flere produkter

Se alle →