Floor-Fix Pro

Plank Grabber Block incl. extra suction pad

1 081 kr
Inkl. mva. Frakt til hentested fra 190 kr. Gratis henting i Oslo.

På lager

Plank Grabber, a fantastic tool for repairing cracks in floating floors. This innovative tool uses a powerful suction system with millions of small suction cups that grip the flat floor areas. This makes it easy to move planks without leaving any residue. Magic Grip Strip is not sticky to the touch and can easily be cleaned with a damp cloth to maintain suction. To repair cracks in the end joints between parquet planks, you just need to place Plank Grabber on the plank you want to move, give it a few light taps with a rubber hammer, and you will see the crack disappear. Plank Grabber is made of premium 6060 anodized aluminum, and it is the easiest way to quickly fix cracks in the floor. If you want a permanent solution, you can use Floor-Fix Pro adhesive (item no. 519331) to hold the plank in place. With Plank Grabber and Floor-Fix Pro Injection Adhesive, you can say goodbye to ugly cracks in floating floors once and for all. It can also be used for floor installation, to fit the last row into the next, by using the edge to pull with a tapping block. Some common questions: How does Plank Grabber attach to the plank? Magic Grip Strip is designed to create suction against the plank, even when the surface is not completely smooth. How do I get Plank Grabber to release? You just need to gently tap the side of Plank Grabber with a rubber mallet, and the vacuum will be broken until you need it again. How long does Magic Grip Strip last? If you clean it with a damp cloth after each use and use the protective cover, it should last for many years. Will it bend if I hit it too hard? If you use a rubber hammer, Plank Grabber will not bend or break. It is made of premium aluminum that is 2 mm thick. Will a new gap form when the plank is moved? It is possible. Sometimes each plank must be moved towards the center of the room to close the gap. Other times, Plank Grabber will pull a row of planks with it (yes, it is that strong) and you may not need to move other planks. What if the plank I move pulls several other planks with it? Plank Grabber is able to pull a row of 4-5 planks at the same time. Just apply a little weight on top when you tap. How can I prevent the gaps from forming again? Use Floor-Fix Pro adhesive (item no. 519331) in the gap before you close it, and it will hold the plank in place permanently. Version 2.0 gives you improved wear-resistant striking points, a premium aluminum construction and an extra suction pad that is included, making the plank-gripping tool even more reliable for professional use.
Les hele beskrivelsen
Betal enkelt og trygt med Vipps i kassen
  • Levering i post2-7 dager
  • Hent i OsloMandag-fredag i åpningstiden
  • ReturvilkårSe vilkårene som gjelder for denne varen
  • Spørsmål om produktet?Chat med oss - svar med en gang, døgnåpent
Se leverings- og returvilkår
Trenger du hjelp til å velge, eller regne ut mengde? Få pristilbud →
Beskrivelse

Plank Grabber, a fantastic tool for repairing cracks in floating floors. This innovative tool uses a powerful suction system with millions of small suction cups that grip the flat floor areas. This makes it easy to move planks without leaving any residue. Magic Grip Strip is not sticky to the touch and can easily be cleaned with a damp cloth to maintain suction. To repair cracks in the end joints between parquet planks, you just need to place Plank Grabber on the plank you want to move, give it a few light taps with a rubber hammer, and you will see the crack disappear. Plank Grabber is made of premium 6060 anodized aluminum, and it is the easiest way to quickly fix cracks in the floor. If you want a permanent solution, you can use Floor-Fix Pro adhesive (item no. 519331) to hold the plank in place. With Plank Grabber and Floor-Fix Pro Injection Adhesive, you can say goodbye to ugly cracks in floating floors once and for all. It can also be used for floor installation, to fit the last row into the next, by using the edge to pull with a tapping block. Some common questions: How does Plank Grabber attach to the plank? Magic Grip Strip is designed to create suction against the plank, even when the surface is not completely smooth. How do I get Plank Grabber to release? You just need to gently tap the side of Plank Grabber with a rubber mallet, and the vacuum will be broken until you need it again. How long does Magic Grip Strip last? If you clean it with a damp cloth after each use and use the protective cover, it should last for many years. Will it bend if I hit it too hard? If you use a rubber hammer, Plank Grabber will not bend or break. It is made of premium aluminum that is 2 mm thick. Will a new gap form when the plank is moved? It is possible. Sometimes each plank must be moved towards the center of the room to close the gap. Other times, Plank Grabber will pull a row of planks with it (yes, it is that strong) and you may not need to move other planks. What if the plank I move pulls several other planks with it? Plank Grabber is able to pull a row of 4-5 planks at the same time. Just apply a little weight on top when you tap. How can I prevent the gaps from forming again? Use Floor-Fix Pro adhesive (item no. 519331) in the gap before you close it, and it will hold the plank in place permanently.

Version 2.0 gives you improved wear-resistant striking points, a premium aluminum construction and an extra suction pad that is included, making the plank-gripping tool even more reliable for professional use.

Bruksområde
Egnet bruksområde avhenger av underlag, rom og ønsket finish. Kontakt oss ved tvil.
Frakt og henting
Levering i post: 2-7 dager. Hent i Oslo: mandag-fredag i åpningstiden. Fraktpris beregnes i kassen.
Usikker på hva du trenger? Vi hjelper deg med riktig produkt og mengde.

Flere produkter

Se alle →