Feltona 2-component PU, matte lacquer 2 kg (A+B)

2 196 kr
Inkl. mva. Frakt til hentested fra 190 kr. Gratis henting i Oslo.

På lager

Feltona PU Matt Varnish Feltona 2-component PU matt is a solvent-free, matt polyurethane topcoat with good abrasion resistance, scratch resistance and UV stability. Feltona 2-component PU matt is intended as a topcoat for use on concrete, wood, microcement and cured plastic.   Instructions for use   Surface preparation The substrate must be sound, clean, dry and free of grease. Clean with Husvask or Gulvrens. Maximum residual moisture in the substrate: 4%. The surface temperature must be at least +12 °C during application and at least 3 °C above the current dew point.   Mixing and application Parts A and B should be above +12°C when mixed. First stir Part A using a slow-speed drill, then add Part B. Mix thoroughly for at least 3 minutes until homogeneous. Pour the mixture into a new bucket. Use a strainer to remove any residue. The mixture must be used immediately. Apply with a roller or airless sprayer at a thickness of 0.15-0.20 kg/m2 per m2. Feltona 2-component PU matt can be applied in several coats for increased strength and wear resistance.   Curing time Feltona 2-component PU matt is fully cured after 6 days and must not be exposed to water spills, chemicals or mechanical wear before fully cured.   Storage The product must be stored in accordance with national regulations. Keep the packaging tightly closed and store in a dry place at a stable temperature. The product must be transported and stored upright, dry and frost-free.   Waste disposal Liquid paint and varnish must not be poured into drains or released into the environment, but must be taken to an approved hazardous waste facility.   Other information The varnish is not frost-resistant. Do not use different batch numbers in the same coat, as this may cause colour differences.   Safety See the separate safety data sheet. Read the information on the packaging. The product may cause allergies and respiratory damage. Wear gloves and respiratory protection.   Application data   Colour: Clear base, transparent matt Application method: Apply with a roller or airless sprayer Cleaning agent: Water or polyurethane cleaner. Cured product must be removed mechanically Thinning: Do not thin Recommended coverage: Approx. 0.15-0.20 kg/m2 Number of coats: 2-3 Dust-dry: 6 hours (20°C, 50% R.H.) Suitable for foot traffic: 24 hours (20°C, 50% R.H.) Application temperature: From +12°C to +30°C for the substrate and air, and at least 3 °C above the current dew point. Curing time: 6 days Shelf life: 18 months in unopened packaging at normal storage temperature   The product must not be used on a damp substrate or exposed to moisture before curing.
Les hele beskrivelsen
Betal enkelt og trygt med Vipps i kassen
  • Levering i post2-7 dager
  • Hent i OsloMandag-fredag i åpningstiden
  • ReturvilkårSe vilkårene som gjelder for denne varen
  • Usikker på mengde?Regn ut i Pakkevelgeren
  • Spørsmål om produktet?Chat med oss - svar med en gang, døgnåpent
Se leverings- og returvilkår

Leggeanvisning

Slik legges Feltona Cretezenz, gulv og vegg på én side

Primer, base, medium og lakk i fire trinn, med tørketider og slipekorn for hvert lag. Pluss det du må gjøre før du starter, og hvor lenge badet må stå før du dusjer.

Trenger du hjelp til å velge, eller regne ut mengde? Få pristilbud → Larger than 40 m²? Get a project price →
Beskrivelse

Feltona PU Matt Varnish


Feltona 2-component PU matt is a solvent-free, matt polyurethane topcoat with good abrasion resistance, scratch resistance and UV stability. Feltona 2-component PU matt is intended as a topcoat for use on concrete, wood, microcement and cured plastic.

 

Instructions for use

 

Surface preparation

The substrate must be sound, clean, dry and free of grease. Clean with Husvask or Gulvrens. Maximum residual moisture in the substrate: 4%. The surface temperature must be at least +12 °C during application and at least 3 °C above the current dew point.

 

Mixing and application

Parts A and B should be above +12°C when mixed. First stir Part A using a slow-speed drill, then add Part B. Mix thoroughly for at least 3 minutes until homogeneous. Pour the mixture into a new bucket. Use a strainer to remove any residue. The mixture must be used immediately. Apply with a roller or airless sprayer at a thickness of 0.15–0.20 kg/m2 per m2. Feltona 2-component PU matt can be applied in several coats for increased strength and wear resistance.

 

Curing time

Feltona 2-component PU matt is fully cured after 6 days and must not be exposed to water spills, chemicals or mechanical wear before fully cured.

 

Storage

The product must be stored in accordance with national regulations. Keep the packaging tightly closed and store in a dry place at a stable temperature. The product must be transported and stored upright, dry and frost-free.

 

Waste disposal

Liquid paint and varnish must not be poured into drains or released into the environment, but must be taken to an approved hazardous waste facility.

 

Other information

The varnish is not frost-resistant. Do not use different batch numbers in the same coat, as this may cause colour differences.

 

Safety

See the separate safety data sheet. Read the information on the packaging. The product may cause allergies and respiratory damage. Wear gloves and respiratory protection.

 

Application data

 

Colour: Clear base, transparent matt

Application method: Apply with a roller or airless sprayer

Cleaning agent: Water or polyurethane cleaner. Cured product must be removed mechanically

Thinning: Do not thin

Recommended coverage: Approx. 0.15–0.20 kg/m2

Number of coats: 2–3

Dust-dry: 6 hours (20°C, 50% R.H.)

Suitable for foot traffic: 24 hours (20°C, 50% R.H.)

Application temperature: From +12°C to +30°C for the substrate and air, and at least 3 °C above the current dew point.

Curing time: 6 days

Shelf life: 18 months in unopened packaging at normal storage temperature

 

The product must not be used on a damp substrate or exposed to moisture before curing.

Bruksområde
Egnet bruksområde avhenger av underlag, rom og ønsket finish. Kontakt oss ved tvil.
Frakt og levering
Levering i post: 2-7 dager. Hent i Oslo: mandag-fredag i åpningstiden. Fraktpris beregnes i kassen.
Usikker på hva du trenger? Vi hjelper deg med riktig produkt og mengde.

Flere produkter

Se alle →