
Feltona Epoxy Primer DT 0.8 kg (A+B)
På lager
Heavy item: ships as freight. This item weighs about 1 kg. You will see the shipping price at checkout, or pick up free in Oslo. Ask for a shipping quote before you order, or pick up free in Oslo.
- Levering i post2-7 dager
- Hent i OsloMandag-fredag i åpningstiden
- ReturvilkårSe vilkårene som gjelder for denne varen
- Usikker på mengde?Regn ut i Pakkevelgeren
- Spørsmål om produktet?Chat med oss - svar med en gang, døgnåpent
Leggeanvisning
Slik legges Feltona Cretezenz, gulv og vegg på én side
Primer, base, medium og lakk i fire trinn, med tørketider og slipekorn for hvert lag. Pluss det du må gjøre før du starter, og hvor lenge badet må stå før du dusjer.
Beskrivelse
Feltona Epoxy Primer DT is a primer for floors where the moisture content of the substrate is uncertain, such as a tiled floor. We recommend it for bathroom floors and self-levelling compound.
Epoxy Primer DT is a two-component, solvent-free primer. Epoxy Primer DT is intended for use on mineral substrates such as concrete, masonry, render and tiles. Apply to untreated substrates before further treatment with epoxy, polyurethane or microcement. Epoxy Primer DT is particularly suitable for concrete with surface moisture. Must be sand-broadcast.
Application data:
Colour: Clear, yellowish
Application method: Squeegee, rubber squeegee or notched trowel. A roller can also be used
Cleaning agent: Xylene or isopropanol. Cured product can only be removed mechanically.
Thinning: The product must not be thinned.
Recommended coverage: Approx. 0.2–0.4 kg/m2, depending on the substrate
Pot life: 50 min. Should be used immediately after parts A and B have been mixed
Dust-dry: 2 hours (20°C, 50% R.H.)
Maximum recoat time: 48 hours (20°C, 50% R.H.)
Application temperature: From +12°C to +30°C for the substrate and air, and at least 3°C above the current dew point.
Curing time: 5–7 days
Shelf life: 2 years in unopened packaging when stored at normal storage temperatures
Instructions for use
Pre-treatment
The substrate must be sound, clean, dry and free of grease. Maximum residual moisture in the substrate: 5% (95% R.H.). Concrete grade: min. C25. Concrete must be pre-treated by grinding, milling, shot blasting or sandblasting. Vacuum the surface thoroughly at the end.
Mixing and application
Pour part B into part A and mix thoroughly for 3–4 min. using a slow-speed drill with a mixer attachment. The mixture must be used immediately. Apply evenly and generously using a squeegee, rubber squeegee or notched trowel. The minimum application temperature is +12°C; this applies to both the substrate and the air. The product temperature must be above +15°C during use. After application, all pores must be filled and the surface must appear sealed, with no dry patches. This is important to prevent air bubbles in the topcoat. The topcoat must be applied within 48 hours. If this time is exceeded, the surface must be lightly sanded to ensure adequate adhesion. The primer can be sand-broadcast to improve adhesion between the products.
