
Feltona Epoxy Primer DT 13.4 kg (A+B)
På lager
Heavy item: ships as freight. This item weighs about 13 kg. You will see the shipping price at checkout, or pick up free in Oslo. Ask for a shipping quote before you order, or pick up free in Oslo.
- Levering i post2-7 dager
- Hent i OsloMandag-fredag i åpningstiden
- ReturvilkårSe vilkårene som gjelder for denne varen
- Usikker på mengde?Regn ut i Pakkevelgeren
- Spørsmål om produktet?Chat med oss - svar med en gang, døgnåpent
Leggeanvisning
Slik legges Feltona Cretezenz, gulv og vegg på én side
Primer, base, medium og lakk i fire trinn, med tørketider og slipekorn for hvert lag. Pluss det du må gjøre før du starter, og hvor lenge badet må stå før du dusjer.
Beskrivelse
Feltona Epoxy Primer DT is a primer for floors where you are unsure about the moisture content of the substrate, for example a tiled floor. We recommend it for bathroom floors and self-levelling compound.
Epoxy Primer DT is a two-component, solvent-free primer. Epoxy Primer DT is intended for use on mineral substrates such as concrete, masonry, render and tiles. Apply to untreated substrates before further treatment with epoxy, polyurethane or microcement. Epoxy Primer DT is particularly suitable for concrete with surface moisture. It must be broadcast with sand.
Technical data:
Colour: Clear, yellowish
Application method: Squeegee, rubber squeegee or notched trowel. A roller may also be used
Cleaning agent: Xylene or isopropanol. Cured product can only be removed mechanically.
Thinning: The product must not be thinned.
Recommended coverage: Approx. 0.2–0.4 kg/m2, depending on the substrate
Pot life: 50 min. Should be used immediately after parts A and B have been mixed
Dust-dry: 2 hours (20°C, 50% R.H.)
Maximum overcoating time: 48 hours (20°C, 50% R.H.)
Application temperature: From +12°C to +30°C for both the substrate and air, and at least 3°C above the prevailing dew point.
Curing time: 5–7 days
Shelf life: 2 years in unopened packaging at normal storage temperature
Instructions for use
Preparation
The substrate must be sound, clean, dry and free of grease. Maximum residual moisture in the substrate: 5% (95% R.H.). Minimum concrete grade: C25. Prepare concrete by grinding, milling, shot blasting or sandblasting. Vacuum the surface thoroughly afterwards.
Mixing and application
Pour part B into part A and mix thoroughly for 3–4 min. using a slow-speed drill with a mixing paddle. The mixture must be used immediately. Apply evenly and generously with a squeegee, rubber squeegee or notched trowel. The minimum application temperature is +12°C; this applies to both the substrate and the air. The product temperature must be above +15°C during use. After application, all pores must be filled and the surface should appear sealed, with no dry patches. This is important to prevent air bubbles in the topcoat. The topcoat must be applied within 48 hours. If this time interval is exceeded, the surface must be lightly sanded to ensure adequate adhesion. Sand may be broadcast onto the primer to improve adhesion between the products.
