Feltona Notebook 5 L

2 250 kr
Inkl. mva. Frakt til hentested fra 190 kr. Gratis henting i Oslo.

På lager

Feltona Heft - bonding primer for mortar and plaster Feltona Heft is a water-based bonding primer for mortar and plaster on non-absorbent substrates. It has an A+ emissions rating, the highest class in the French indoor air emissions labeling scheme. The container holds 5 liters and covers approximately 40-50 m². Feltona Heft is also available in 1 liter. Substrate The substrate must be clean and stable. How to apply Feltona Heft Stir before use. Apply with a brush, short-pile roller, or suitable spray gun, ensuring an even, continuous film over the surface. At 23°C, wait at least 30 minutes and no more than 48 hours before applying mortar or plaster. On slightly absorbent substrates, you can dilute it with up to 10% water. Coverage Approximately 8-10 m² per liter, depending on how rough and absorbent the substrate is. Storage 12 months from the date of manufacture in the original packaging. Keep tightly closed and protect from frost and direct sunlight.
Les hele beskrivelsen
Betal enkelt og trygt med Vipps i kassen
  • Levering i post2-7 dager
  • Hent i OsloMandag-fredag i åpningstiden
  • ReturvilkårSe vilkårene som gjelder for denne varen
  • Usikker på mengde?Regn ut i Pakkevelgeren
  • Spørsmål om produktet?Chat med oss - svar med en gang, døgnåpent
Se leverings- og returvilkår
Trenger du hjelp til å velge, eller regne ut mengde? Få pristilbud →
Beskrivelse

Feltona Heft - bonding primer for mortar and plaster

Feltona Heft is a water-based bonding primer for mortar and plaster on non-absorbent substrates. It has an A+ emissions rating, the highest class in the French indoor air emissions labeling scheme.

The container holds 5 liters and covers approximately 40–50 m². Feltona Heft is also available in 1 liter.

Substrate

The substrate must be clean and stable.

How to apply Feltona Heft

Stir before use. Apply with a brush, short-pile roller, or suitable spray gun, ensuring an even, continuous film over the surface.

At 23°C, wait at least 30 minutes and no more than 48 hours before applying mortar or plaster. On slightly absorbent substrates, you can dilute it with up to 10% water.

Coverage

Approximately 8–10 m² per liter, depending on how rough and absorbent the substrate is.

Storage

12 months from the date of manufacture in the original packaging. Keep tightly closed and protect from frost and direct sunlight.

Bruksområde
Egnet bruksområde avhenger av underlag, rom og ønsket finish. Kontakt oss ved tvil.
Frakt og levering
Levering i post: 2-7 dager. Hent i Oslo: mandag-fredag i åpningstiden. Fraktpris beregnes i kassen.
Usikker på hva du trenger? Vi hjelper deg med riktig produkt og mengde.

Flere produkter

Se alle →