Trapp

Staircase renovation: how to renovate your stairs step by step

How to renew your staircase with Feltona oak stair renovation panels - step by step, from preparation to the finished staircase.

Trapp fornyet med Feltona Trappefornyer i eik, sett nedenfra
After: Stair Renovation in oak. Photo: Zenzorama / Rune Haraldsen.

A worn staircase doesn’t have to be replaced. With a stair renovation kit, you glue new oak treads directly over the old ones, giving the staircase a fresh, modern look without demolition. Here we show you step by step how to renovate your staircase with Feltona Stair Renovation, what you’ll need, and which mistakes to avoid.

Feltona Stair Renovation oak tread with nosing
Feltona Stair Renovation in oak.

Before and after: a worn staircase gets a new look

Here is an old, worn pine staircase that has been fitted with new oak treads and risers using a stair renovation kit. The structure is unchanged, but the look is completely new.

Old pine staircase before renovation, viewed from below
Before. Photo: Zenzorama / Rune Haraldsen.
Old, worn pine staircase before renovation, viewed from above
Before. Photo: Zenzorama / Rune Haraldsen.
Same staircase after renovation with oak treads and risers, viewed from above
After: Stair Renovation in oak. Photo: Zenzorama / Rune Haraldsen.

What is a stair renovation kit?

A stair renovation kit consists of new treads with a nosing that are fitted directly over the existing treads. You don’t need to demolish the staircase, and the job is quicker and less expensive than building a new staircase. Feltona Stair Renovation is made from oak, a hard-wearing wood that is well suited to heavily used staircases.

A stair renovation kit cannot fix a weak structure. The staircase must be stable, and very damaged or uneven stairs may need preparation before installation.

What you’ll need

How to renovate your staircase step by step

1. Inspect and prepare the staircase

The staircase must be stable, with no movement or squeaking in the treads. The surface must be firm, level, clean and dry. Check the instructions for suitable surfaces, including concrete. Carpet, vinyl and other loose coverings must be removed. Lightly sand varnished or painted surfaces, and vacuum thoroughly.

2. Measure each tread

Measure each tread individually. Old staircases are rarely exactly the same from one tread to the next, and walls are often not square. A tread template lets you accurately transfer the shape and length of the old tread to the new one. Choose single or double treads based on the depth and width of the staircase.

Tread gauge used to measure a stair tread before cutting
The tread gauge transfers the measurements from the tread.
Feltona tread template with six adjustable legs for measuring stair treads
Feltona tread template with six legs.

3. Cut to size and dry-fit

Cut the treads to match the template, and place them loosely in position before gluing. This lets you see if anything needs adjusting while it’s still easy to do. Label the treads so you know where each one belongs.

4. Install the risers or rear-edge strip

For a closed staircase, install oak risers on the vertical surfaces. For an open staircase, finish the rear edge of each tread with a rear-edge strip. Follow the installation instructions for the correct order.

Oak riser for Feltona Stair Renovation
Riser for a closed staircase.
Oak rear-edge strip for Feltona Stair Renovation for open staircases
Rear-edge strip for an open staircase.

5. Glue the treads

Use Soudal Fix All Turbo. Follow the coverage, curing time and temperature guidelines on the tube. Apply the adhesive to the old tread, position the new tread and press it down firmly. Check that the nosing sits flush against the old tread and that the tread is correctly positioned before the adhesive cures. Finish one tread before taking a break.

6. Let the adhesive cure

Do not use the staircase until the adhesive has fully cured, as instructed.

7. Apply a surface treatment

The treads sold in the online store are unfinished oak and must be treated. Use hardwax oil suitable for oak treads; see stair renovation accessories. Add anti-slip additive to the hardwax oil to make the treads less slippery. See the product page for the recommended dosage. For commercial and shared staircases, get in touch so we can check the project requirements.

Common mistakes to avoid

  • Installing on a staircase that moves or squeaks.
  • Measuring once and cutting all the treads to the same size.
  • Leaving behind carpet or vinyl remnants.
  • Gluing without dry-fitting first.
  • Forgetting to treat unfinished treads.

Install it yourself or get help?

Many people install it themselves. The job requires accurate measuring, cutting and gluing. Incorrect installation can result in loose treads. Always follow the installation instructions. If the structure is uncertain, the staircase is curved, or there are hidden installations, get in touch or seek professional help. The time required depends on the number of treads and the preparation needed.

Check that the staircase still meets requirements for rise, tread depth and handrails after installation. If in doubt, ask us or a professional.

For curved staircases and custom treads, get in touch and we’ll assess whether Stair Renovation is suitable.

If you’d rather have us do the work, we offer site visits and installation. You can also buy the materials only. Read more on the Feltona Stair Renovation page.

Staircase maintenance

Regular cleaning and care will keep oiled treads looking their best. Our accessories include Eco Magic Cleaner for cleaning, as well as care products such as Wash Care Oil and Wax Care for oiled surfaces.

Frequently asked questions about stair renovation kits

Which adhesive should I use?

Use Soudal Fix All Turbo, and follow the coverage, curing time and temperature guidelines on the tube. Do not use the staircase until the adhesive has fully cured.

Can I install a stair renovation kit myself?

Many people install it themselves. The job requires accurate measuring, cutting and gluing. Always follow the installation instructions. If the structure is uncertain, the staircase is curved, or there are hidden installations, get in touch or seek professional help.

What surfaces are suitable for a stair renovation kit?

Firm, stable surfaces. The surface must be level, clean and free of loose coverings such as carpet and vinyl. Check the instructions for suitable surfaces, including concrete.

How long does it take to renovate a staircase?

The time required depends on the number of treads and the preparation needed. You’ll also need to allow time for the adhesive to cure and for the surface treatment.

How do I measure stair treads?

Measure each tread individually using a tread template, which transfers the shape and length of the old tread to the new one.

What is the difference between a riser and a rear-edge strip?

Risers cover the vertical surfaces of a closed staircase. A rear-edge strip is used to finish the back edge of a tread on an open staircase.

What sizes are the treads available in?

Single treads in 900 and 1000 x 294 mm, and double treads in 1300, 1450 and 1800 x 590 mm; all are 8 mm thick and made of oak.

Do the treads need to be treated after installation?

Yes, unfinished treads must be treated, for example with hardwax oil suitable for oak treads.

Will the staircase be slippery?

Add anti-slip additive to the hardwax oil to make the treads less slippery. See the product page for the recommended dosage. For commercial and shared staircases, get in touch so we can check the project requirements.

Is a stair renovation kit cheaper than a new staircase?

It is often a less expensive alternative to a new staircase. The price depends on the model, size, number of treads and whether you install it yourself.