Feltona Cretezenz microcement - Medium, 12 kg

2 628 kr
Inkl. mva. Frakt til hentested vanligvis 200-350 kr. Gratis henting i Oslo.

På lager

Cretezenz Medium - topcoat for walls and floors with a subtle texture Cretezenz Medium is the topcoat in the Feltona Cretezenz system, with slightly more texture than Cretezenz Fin. The grains are somewhat coarser, giving it a calmer, more matte appearance. Medium is suitable for bathrooms, kitchens, hallways and living rooms, on both walls and floors. On floors, its subtle texture may feel less slippery than Fin. Medium has no stated slip-resistance rating. This tub contains 12 kg. Medium is also available in 4 kg. How to build up the surface Feltona Primer Z. On floors, use Feltona Epoxy Primer DT. Two coats of Cretezenz Base. Two coats of Cretezenz Medium. Two coats of Feltona 2-component PU Matte Varnish. Two coats of Medium use approx. 0.9 kg per m², including 10% allowance for waste. One 12 kg tub covers approx. 13 m². The microcement calculator works out all the materials needed for your area, and the guide shows each step. If you want to buy everything together, packages for 4, 11 and 24 m² are available. Colour Medium is coloured using pigment that you add before use. Choose one of the 17 standard colours in the colour chart, or provide an NCS code. We mix over 3,500 NCS colours on request. Enter the colour in the Order instructions field in the shopping cart. Mixing to an NCS code provides an approximation, so view a physical sample before covering large areas. Substrate The substrate must be sound, stable and dry, with the correct pre-treatment and system build-up. Existing tiles are a common substrate. OSB and plasterboard require a specific assessment before you begin. Bathrooms and wet rooms Cretezenz is a surface finish. In wet rooms, a waterproofing membrane must be installed underneath where required by wet-room regulations. Read more about microcement in bathrooms. If Aquapro boards are used on walls, Cretezenz is approved by the supplier as a topcoat on Aquapro Light. Total and Ultralight are not covered, and the approval is not a SINTEF Technical Approval. See Aquapro Light. Cretezenz is not intended for swimming pools or surfaces in constant contact with water, and we do not recommend it for outdoor use.
Les hele beskrivelsen
Betal enkelt og trygt med Vipps i kassen
  • Levering i post2-7 dager
  • Hent i OsloMandag-fredag i åpningstiden
  • ReturvilkårSe vilkårene som gjelder for denne varen
  • Usikker på mengde?Regn ut i Pakkevelgeren
  • Spørsmål om produktet?Chat med oss - svar med en gang, døgnåpent
Se leverings- og returvilkår

Goes with

Leggeanvisning

Slik legges Feltona Cretezenz, gulv og vegg på én side

Primer, base, medium og lakk i fire trinn, med tørketider og slipekorn for hvert lag. Pluss det du må gjøre før du starter, og hvor lenge badet må stå før du dusjer.

Trenger du hjelp til å velge, eller regne ut mengde? Få pristilbud → Larger than 40 m²? Get a project price →
Beskrivelse

Cretezenz Medium – topcoat for walls and floors with a subtle texture

Cretezenz Medium is the topcoat in the Feltona Cretezenz system, with slightly more texture than Cretezenz Fin. The grains are somewhat coarser, giving it a calmer, more matte appearance. Medium is suitable for bathrooms, kitchens, hallways and living rooms, on both walls and floors.

On floors, its subtle texture may feel less slippery than Fin. Medium has no stated slip-resistance rating.

This tub contains 12 kg. Medium is also available in 4 kg.

How to build up the surface

  1. Feltona Primer Z. On floors, use Feltona Epoxy Primer DT.
  2. Two coats of Cretezenz Base.
  3. Two coats of Cretezenz Medium.
  4. Two coats of Feltona 2-component PU Matte Varnish.

Two coats of Medium use approx. 0.9 kg per m², including 10% allowance for waste. One 12 kg tub covers approx. 13 m². The microcement calculator works out all the materials needed for your area, and the guide shows each step. If you want to buy everything together, packages for 4, 11 and 24 m² are available.

Colour

Medium is coloured using pigment that you add before use. Choose one of the 17 standard colours in the colour chart, or provide an NCS code. We mix over 3,500 NCS colours on request. Enter the colour in the Order instructions field in the shopping cart. Mixing to an NCS code provides an approximation, so view a physical sample before covering large areas.

Substrate

The substrate must be sound, stable and dry, with the correct pre-treatment and system build-up. Existing tiles are a common substrate. OSB and plasterboard require a specific assessment before you begin.

Bathrooms and wet rooms

Cretezenz is a surface finish. In wet rooms, a waterproofing membrane must be installed underneath where required by wet-room regulations. Read more about microcement in bathrooms.

If Aquapro boards are used on walls, Cretezenz is approved by the supplier as a topcoat on Aquapro Light. Total and Ultralight are not covered, and the approval is not a SINTEF Technical Approval. See Aquapro Light.

Cretezenz is not intended for swimming pools or surfaces in constant contact with water, and we do not recommend it for outdoor use.

Bruksområde
Egnet bruksområde avhenger av underlag, rom og ønsket finish. Kontakt oss ved tvil.
Frakt og levering
Levering i post: 2-7 dager. Hent i Oslo: mandag-fredag i åpningstiden. Fraktpris beregnes i kassen.
Usikker på hva du trenger? Vi hjelper deg med riktig produkt og mengde.

Flere produkter

Se alle →