Feltona Cretezenz microcement – Base 4 kg

1 395 kr
Inkl. mva. Frakt til hentested fra 190 kr. Gratis henting i Oslo.

På lager

Cretezenz Base - the foundation beneath Medium and Fine Cretezenz Base is the first layer in the Feltona Cretezenz system. Apply it in two coats before the topcoat, Cretezenz Medium or Cretezenz Fine. Base provides a rough surface that the next layer bonds well to. Base has a coarse texture and bonds well, so it can also be used as a filler. Fill joints, small irregularities and minor imperfections in the substrate with Base before applying the first coat. To work faster, you can use fast-setting Feltona Quick Rep together with Base. In some cases, Base can also be used as a topcoat if you want a rougher, more rustic finish with a more pronounced texture. This tub contains 4 kg. Base is also available in 12 kg. How to build up the surface Feltona Primer Z. On floors, use Feltona Epoxy Primer DT. Two coats of Cretezenz Base. Two coats of Cretezenz Medium or Cretezenz Fine. Two coats of Feltona 2-component PU Matt lacquer. Two coats of Base use approximately 1.8 kg per m², including joints and 10% waste. One 4 kg tub covers approximately 2.2 m². The microcement calculator works out all the materials you need for your area, and the guide shows each step. If you want to buy everything together, kits for 4, 11 and 24 m² are available. Colour Base is coloured with pigment, which you add before use. Choose one of the 17 standard colours in the colour chart, or provide an NCS code. We mix over 3,500 NCS colours on request. Enter the colour in the Order instructions field in your shopping cart. Mixing to an NCS code provides an approximation, so view a physical sample before covering large areas. Substrate The substrate must be firm, stable and dry, with the correct preparation and system build-up. Existing tiles are a common substrate. OSB and plasterboard require a specific assessment before you begin. Bathrooms and wet rooms Cretezenz is a surface finish. In wet rooms, a waterproofing membrane must be installed underneath wherever required by wet-room regulations. Read more about microcement in bathrooms. If Aquapro boards are used on walls, Cretezenz is approved by the supplier as a topcoat on Aquapro Light. Total and Ultralight are not covered, and this approval is not a SINTEF Technical Approval. See Aquapro Light. Cretezenz is not intended for swimming pools or surfaces subject to constant water exposure, and we do not recommend it for outdoor use.
Les hele beskrivelsen
Betal enkelt og trygt med Vipps i kassen
  • Levering i post2-7 dager
  • Hent i OsloMandag-fredag i åpningstiden
  • ReturvilkårSe vilkårene som gjelder for denne varen
  • Usikker på mengde?Regn ut i Pakkevelgeren
  • Spørsmål om produktet?Chat med oss - svar med en gang, døgnåpent
Se leverings- og returvilkår

Leggeanvisning

Slik legges Feltona Cretezenz, gulv og vegg på én side

Primer, base, medium og lakk i fire trinn, med tørketider og slipekorn for hvert lag. Pluss det du må gjøre før du starter, og hvor lenge badet må stå før du dusjer.

Trenger du hjelp til å velge, eller regne ut mengde? Få pristilbud → Larger than 40 m²? Get a project price →
Beskrivelse

Cretezenz Base - the foundation beneath Medium and Fine

Cretezenz Base is the first layer in the Feltona Cretezenz system. Apply it in two coats before the topcoat, Cretezenz Medium or Cretezenz Fine. Base provides a rough surface that the next layer bonds well to.

Base has a coarse texture and bonds well, so it can also be used as a filler. Fill joints, small irregularities and minor imperfections in the substrate with Base before applying the first coat. To work faster, you can use fast-setting Feltona Quick Rep together with Base.

In some cases, Base can also be used as a topcoat if you want a rougher, more rustic finish with a more pronounced texture.

This tub contains 4 kg. Base is also available in 12 kg.

How to build up the surface

  1. Feltona Primer Z. On floors, use Feltona Epoxy Primer DT.
  2. Two coats of Cretezenz Base.
  3. Two coats of Cretezenz Medium or Cretezenz Fine.
  4. Two coats of Feltona 2-component PU Matt lacquer.

Two coats of Base use approximately 1.8 kg per m², including joints and 10% waste. One 4 kg tub covers approximately 2.2 m². The microcement calculator works out all the materials you need for your area, and the guide shows each step. If you want to buy everything together, kits for 4, 11 and 24 m² are available.

Colour

Base is coloured with pigment, which you add before use. Choose one of the 17 standard colours in the colour chart, or provide an NCS code. We mix over 3,500 NCS colours on request. Enter the colour in the Order instructions field in your shopping cart. Mixing to an NCS code provides an approximation, so view a physical sample before covering large areas.

Substrate

The substrate must be firm, stable and dry, with the correct preparation and system build-up. Existing tiles are a common substrate. OSB and plasterboard require a specific assessment before you begin.

Bathrooms and wet rooms

Cretezenz is a surface finish. In wet rooms, a waterproofing membrane must be installed underneath wherever required by wet-room regulations. Read more about microcement in bathrooms.

If Aquapro boards are used on walls, Cretezenz is approved by the supplier as a topcoat on Aquapro Light. Total and Ultralight are not covered, and this approval is not a SINTEF Technical Approval. See Aquapro Light.

Cretezenz is not intended for swimming pools or surfaces subject to constant water exposure, and we do not recommend it for outdoor use.

Bruksområde
Egnet bruksområde avhenger av underlag, rom og ønsket finish. Kontakt oss ved tvil.
Frakt og levering
Levering i post: 2-7 dager. Hent i Oslo: mandag-fredag i åpningstiden. Fraktpris beregnes i kassen.
Usikker på hva du trenger? Vi hjelper deg med riktig produkt og mengde.

Flere produkter

Se alle →